mdam

Publications

International Paper

JCR Top 5%, IF 13.1

3 Published

JCR Top 10%, IF 6.3

34 Published

JCR Top 15%, IF 9.1

5 Published

JCR Top 15%, IF 8.7

7 Published

80 Seung Yoon On, Seong Yeon Park, Wonvin Kim, and Seong Su Kim*, “Bimodal coaxial fiber sensor for simultaneous strain and temperature sensing for composite manufacturing process” Composites Science and Technology, Volume 251 (2024), 110552

 
79 Hyunsoo Hong, Wonki Kim, Wonvin Kim, Jae-moon Jeong, Samuel Kim, and Seong Su Kim*, “Machine Learning-Driven Design Optimization of Buckling-Induced Quasi-Zero Stiffness Metastructures for Low-Frequency Vibration Isolation” ACS Applied Materials & Interfaces, 2024, 16, 14, 17965–17972

 
78 Hyeonseong Jo, Sangyoon Bae, Hyunsoo Hong, Wonvin Kim, Seong Su Kim*, “Prediction of transverse permeability in representative volume elements with closely arranged fibers through the application of delaunay-triangulation and electrical-circuit analogy” Composite Structures, Volume 334(2024), 117984

 
77 Amanpreet Kaur, Seong Su Kim, Jun Woo Lim, “Electrode-integrated bipolar plate structure for multi-cells in vanadium redox flow batteries” Journal of Power Sources, Volume 598(2024), 234188

 
76 Sun Won Kim, Jae Hyuk Lim, Seong Su Kim*, “Enhanced prediction of transverse mechanical behavior of unidirectional fiber-reinforced composites using new spatial descriptors based on deep neural networks” Composite Structures, Volume 330(2024), 117870

 
75 Seung Jaeheon Choe, Dongyoung Lee, Seung Yoon On, Seong Su Kim, Jun Woo Lim*, “Development of a spread-tow fabric composite bipolar plate with fiber-spreading effect for vanadium redox flow battery” Composite: Part A 176 (2024) 107878
74 Kwang Il Jeong, Su Hyun Lim, Hyunsoo Hong, Jae-Moon Jeong, Won Vin Kim, Seong Su Kim*, “Enhancing Vanadium redox flow batteries performance through local compression ratio adjustment using stiffness gradient carbon felt electrodes” Applied Materials Today, Volume 35 (2023), 101928
73 Hyunsoo Hong, Kwang Il Jeong, Seung Yoon On, Wonvin Kim, Seong Su Kim*, “Structural optimization of an arch-structured epoxy/rubber composite vibration isolator using deep Q-value neural network reinforcement learning” Composite Structures, Volume 323(2023), 117506
72 Seong Yeon Park, Seung Yoon On, Junmo Kim, Jeonyoon Lee, Taek-Soo Kim, Brian L. Wardle*, and Seong Su Kim*, “Reducing Bonding Temperature and Energy Consumption in Electronic Packaging Using Flash Electro-Thermal Carbon Fiber Heating Elements” ACS Appl. Mater. Interfaces 2023, 15, 32, 38750–38758
71 Dajeong Kang, Jae-Moon Jeong, Kwang Il Jeongk Seong Su Kim*, “Improving the Deformability and Recovery Moment of Shape Memory Polymer Composites for Bending Actuators: Multiple Neutral Axis Skins and Deployable Core” ACS Appl. Mater. Interfaces, 2023(15) 28, 33944-33956
70 Muhammad Salman Sarfraz, Hyunsoo Hong, Seong Su Kim*, “Lightweight thermoplastic coated soft magnetic composites (SMC) and application for high-efficiency brushless DC motors”, Composite Structures, Volume 320(2023): 117195
69 Seung Yoon On, Seong Yeon Park, Yong Sik Chung, and Seong Su Kim*, “Effects of microwave-assisted cross-linking on the creep resistance and sensing accuracy of a coaxial-structured fiber strain sensor”, Advanced Materials Technologies, 2023;8:2201615.
68  

Seong Yeon Park, Seung Yoon On, Junmo Kim, Jeonyoon Lee, Taek-Soo Kim, Brian L. Wardle*, and Seong Su Kim*, “Electronic Packaging Enhancement Engineered by Reducing the Bonding Temperature via Modified Cure Cycles“, ACS Appl. Mater. Interfaces 2023, 15, 8, 11024–11032
67  

Seung Yoon On, Hyemi Moon, Seong Yeon Park, Tae Woong Ohm, Wonvin Kim, Hyunsoo Hong, Seong Su Kim*, “Design of periodic arched structures integrating the structural nonlinearity and band gap effect for vibration isolation”, Materials & Design, 2022;224:111397.
66  

Wonvin Kim, Su Hyun Lim, Hyunsoo Hong, Kwang Il Jeong, Seung Yoon On, Seong Yeon Park, Jun Il You, Seong Su Kim*, “Optimum boundaries for maximum load-carrying capacity in water-lubricated composite journal bearings incorporating turbulences and inertial effects based on elastohydrodynamic analysis”, Journal of Computational Design and Engineering, 2022,9,2506-2523;
65  

Hyunsoo Hong, Muhammad Salman Sarfraz, Mingoo Jeong, Taeyeon Kim, Jungrak Choi, Kyoungchul Kong, Inkyu Park, Seong Su Kim*, “Prediction of ground reaction forces using the artificial neural network from capacitive self-sensing values of composite ankle springs for exo-robots”, Composite Structures 301 (2022): 116233.
64  

Amanpreet Kaur, Kwang Il Jeong, Seong Su Kim, Jun Woo Lim*, “Optimization of thermal treatment of carbon felt electrode based on the mechanical properties for high-efficiency vanadium redox flow batteries”, Composite Structures 290 (2022): 115546.
63  

Sang Min Baek, Won Jun Lee, Sang Yong Kim, Seong Su Kim*, “A study on the microwave absorbing honeycomb core embedded with conductive periodic patterned surfaces for the effective dielectric constant.” Composite Structures 289 (2022): 115471.
62 Seung-Yeon Jang, Jung-Hwan Youn, Su Hyun Lim, Seong Su Kim, Uikyum Kim, Ki-Uk Kyung*, “Development of a Three-axis Monolithic Flexure-based Ground Reaction Force Sensor for Various Gait Analysis”, IEEE Robotics and Automation Letters, 2022.

 
61  

Kwang Il Jeong, Jae-Moon Jeong, Jaehyung On, Jun Woo Lim, Seong Su Kim*, “An integrated composite structure with reduced electrode/bipolar plate contact resistance for vanadium redox flow battery”, Composite Part B: Engineering, 2022, 233: 109657.
60  

Jae-Moon Jeong, Soohyun Eum, Seung Yoon On, Kazuro Kageyama, Hideaki Murayama, Kiyoshi Uzawa, Seong Su Kim*, “In-situ resin flow monitoring in VaRTM process by using optical frequency Domesticain reflectometry and long-gauge FBG sensors.”, Composite Structures, 2022;282:115034.
59  

Tae-Chang Ahn, Hyunsoo Hong, Seong Su Kim, Hui-Yun Hwang*, “Improvement of adhesion characteristics of copper electrodes on polyvinylidene fluoride films using bovine serum albumin.“, International Journal of Adhesion and Adhesives, 2022,103025.
58  

Jungrak Choi, Chankyu Han, Seokjoo Cho, Kyuyoung Kim, Junseong Ahn, Dionisio Del Orbe, Incheol Cho, Zhi-Zun Zhao, Yong Suk Oh, Hyunsoo Hong, Seong Su Kim, Inkyu Park*, “Customizable, conformal, and stretchable 3D electronics via predistorted pattern generation and thermoforming.“, Science Advances, 2021, 10.112.
57  

 

Jinwoo Park, Yeol Hun Sung, Seung Yoon On, O-Hyun Kwon, Hyochoong Bang, Seong Su Kim, Jae-Hung Hang, and Jung-Ryul Lee*, “Development of wireless SHM sensor node for in-flight real-time monitoring using embedded CNT fiber sensors.“, Smart Structures and System, 2021;28:333-341.
56  

Seong Yeon Park, Woe Tae Kim, Jae Hoon Choi, Seung Yoon On, Seong Su Kim*, “Effects of process-induced residual stress and geometric characteristics on pressure-resisting capability of corrugation in primary barriers of liquefied natural gas carriers.“, Ocean Engineering, 2021;237:109613.
55  

Jae-Moon Jeong, Kwang Il Jeong, Jae Hyung Oh, Yong Sik Chung, Seong Su Kim*, “Stacked carbon paper electrodes with pseudo-channel effect to improve flow characteristics of electrolyte in vanadium redox flow batteries.“, Applied Materials Today, 2021;24:101139.
54  

Kim, Wonvin, Su Hyun Lim, Dajeong Kang, Sangyoon Bae, Seung Yoon On, Seong Su Kim*, “Research trends and future perspective in nonconventional machining of fiber-reinforced polymers: A review.“, Functional Composites and Structures, 2021;3:022001
53  

Sang Min Baek, Won Jun Lee, Sang Yong Kim, Seong Su Kim*, “Design of an equivalent dielectric film using periodic patterned screen printing and prediction of dielectric constants based on equivalent circuit method“, Composites Structures,2021;271:114151.
52  

Su Hyun Lim, Seung Yoon On, Hyoungsoo Kim, Yun Hyuk Bang, Seong Su Kim*, “Resin impregnation and interfacial adhesion behaviors in carbon fiber/ epoxy composites: Effects of polymer slip and normalized surface free energy with respect to the sizing agents“, Composites Part A,2021;146:106424.
51  

Muhammad Salman Sarfraz, Hyunsoo Hong, Seong Su Kim*, “Recent developments in the manufacturing technologies of composite components and their cost-effectiveness in the automotive industry: A review study“, Composite Structures,2021,113864.
50  

Kwang Il Jeong, Jaehyung Oh, Seung A Song, Dongyoung Lee, Dai Gil Lee, Seong Su Kim*, “ A review of composite bipolar plates in proton exchange membrane fuel cells: Electrical properties and gas permeability“, Composite Structures, 2021;262;113617.
49 Hyunsoo Hong, Seung A Song, Seong Su Kim*, “Phase transformation of poly (vinylidene fluoride)/TiO2 nanocomposite film prepared by microwave-assisted solvent evaporation: An experimental and molecular dynamics study”, Composites Science and Technology, 2020;108375.
48 Jae Young Seok, Seung A Song, Inyeong Yang, Kyoohee Woo, Seong Yeon Park, Jung Hwan Park, Sanha Kim*, Seong Su Kim*, Minyang Yang*, “Hierarchically Porous Carbon Nanofibers with Controllable Porosity Derived from Iodinated Polyvinyl Alcohol for Supercapacitors”, Advanced Materials Interfaces, 2020;2000513.
47 Woe Tae Kim, Seong Su Kim*, “Design of a segment-type ring burst test device to evaluate the pressure resistance performance of composite pressure vessels”, Composite Structures, 2020;242,112199.
46 Seung Yoon On, Steve Park, Seong Su Kim*, “Preparation and Characterization of Hybrid Structured MWCNT/UHMWPE Fiber Sensors for Strain Sensing and Load Bearing of Composite Structures”, Advanced Materials Technologies, 2019;4:1900807.
45 Kwang Il Jeong, Seung A Song, Seong Su Kim*, “Glucose-based carbon-coating layer on carbon felt electrodes of vanadium redox flow batteries”, Composites Part B: Engineering, 2019;175.
44 Da Hye Kim, Hui Yun Hwang, Seong Su Kim*, “Fabrication of PVDF film sensors for fatigue damage monitoring of single-lap adhesive joints”. Composite Structures, 2019;207: 223-231.
43 Seung Yoon On, Yun Seong Kim*, Jun Il You, Jun Woo Lim, Seong Su Kim*, “Dynamic characteristics of composite tilting pad journal bearing for turbine/generator applications”. Composite Structures, 2018;201: 747–759.
42 Ibrahim M.A.Mohamed, Ahmed S.Yasin,Nasser A.M.Barakat,Seung A.Song, Ha EunLee, Seong Su Kim*, “Electrocatalytic behavior of a nanocomposite of Ni/Pd supported by carbonized PVA nanofibers towards formic acid, ethanol and urea oxidation: A physicochemical and electro-analysis study”. Applied Surface Science, 2018;435: 122-129.
41 Kun Jeong, Da Hye Kim, Yong Sik Chung, Sang Kyun Hwang, Hui Yun Hwang, Seong Su Kim*, “Effect of processing parameters of the continuous wet spinning system on the crystal phase of PVDF fibers”, Journal of Applied Polymer science, 2018;134, 45712. (Cover page)
40 Ha Eun Lee, Yong Sik Chung, Seong Su Kim*, “Feasibility study on carbon-felt-reinforced thermoplastic composite materials for PEMFC bipolar plates”, Composite Structures, 2017;180:378-385.
39 Seung A Song, Youngmin Lee, Yeon Su Kim, Seong Su Kim*, “Mechanical and thermal properties of carbon foam derived fromphenolic foam reinforced with composite particles”, Composite Structures, 2017;173:1-8.
38 Seung Yoon On, Moo Sun Kim, Seong Su Kim*, “Effects of post-treatment of meta-aramid nanofiber mats on the adhesion strength of epoxy adhesive joints”, Composite Structures, 2017;159:636-645.
37 Seung A Song, Choong Kwang Lee, Yun Hyuk Bang, Seong Su Kim*, “A novel coating method using zinc oxide nanorods to improve the interfacial shear strength between carbon fiber and a thermoplastic matrix”, Composites Science and Technology, 2016;134:106-114.
36 Kang Yeong Choe, Seung Yoon On, Seung A. Song, Jun Woo Lim, Jun Il You, Seong Su Kim*, “Study of the endurance performance of composite journal bearings under the oil cut situation”, Composite Structures, 2015;134:772-781.
35 Seung Jin See, Song Hee Han, Kwang Un Jeong, Il Joon Bae, Ik Pyo Hong, Su Kang Choi, Seong Su Kim*, “Effect of crystal morphology transition of polypropylene on interfacial properties of carbon fiber-reinforced composites through AlOOH surface treatment”, Composites Part A : applied science and manufacturing, 2015;78:362-370.
34 Ha Eun Lee, Song Hee Han, Seung A Song, Seong Su Kim*, “Novel fabrication process for carbon fiber composite bipolar plates using sol gel and the double percolation effect for PEMFC”, Composite Structures, 2015;134:44-51.
33 Song Hee Han, Eun Jeong Cho, Hyun Chul Lee, Seong Su Kim*, “Study on high-speed RTM to reduce the impregnation time of carbon/epoxy composites”, Composite Structures, 2015;119:50-58.
32 Oh Min Kwon, Seung Jin See, Seong Su Kim, Hui Yun Hwang*, “Effects of surface treatment with coupling agents of PVDF-HFP fibers on the improvement of the adhesion characteristics on PDMS”, Applied Surface Science, 2014;321:378-386.
31 Seung A. Song, Yong Sik Chung, Seong Su Kim*, “The mechanical and thermal characteristics of phenolic foams reinforced with carbon nanoparticles”, Composites Science and Technology, 2014;103:85-93.
30 Yun Hwangbo, Choong-Kwang Lee, Alexander E Mag-Isa, Jae-Won Jang, Hak-Joo Lee, Soon-Bok Lee, Seong Su Kim*, Jae-Hyun Kim*, “Interlayer non-coupled optical properties for determining the number of layers in arbitrarily stacked multilayer graphenes”, Carbon, 2014;77:454-461.
29 Hyun Ju Oh, Hak Yong Kim, Seong Su Kim*, “colorEffect of the core/shell structured meta-aramid/epoxy nanofiber on the mechanical and thermal properties in epoxy adhesive composites by Electrospinning”, The Journal of Adhesion, 2014;90:787-801.
28 Hyun Ju Oh, Song Hee Han, Seong Su Kim*, “A novel method for a high-strength electrospun meta-aramid nanofiber by microwave treatment”, Journal of Polymer Science Part B: Polymer Physics, 2014;52:807-814. (Cover page)
27 Choong-Kwang Lee, Yun Hwangbo, Sang-Min Kim, Seoung-Ki Lee, Seung-Mo Lee, Seong-Su Kim, Kwang-Seop Kim, Hak-Joo Lee, Byung-Ik Choi, Chang-Kyu Song, Jong-Hyun Ahn*, Jae-Hyun Kim*, “Monoatomic Chemical-Vapor-Deposited Graphene Membranes Bridge a Half Millimeter-Scale Gap”, ACS Nano, 2014;8:2336-2344.
26 Hyun Ju Oh, Song Hee Han, Hak Yong Kim, Seong Su Kim*, “The influence of the core–shell structured meta-aramid/epoxy nanofiber mats on interfacial bonding strength and the mechanical properties of epoxy adhesives at cryogenic environment”, Journal of Adhesion Science and Technology, 2014;28:950-962.
25 Hyun Chul Lee, Yong Sik Jung, Hyun Ju Oh, Seong Su Kim*, “Design of a hybrid composite strut tower for use in automobiles”, Advanced Composite Materials, 2014;23:275-291.
24 Song Hee Han, Hyun Ju Oh, Seong Su Kim*, “Evaluation of the impregnation characteristics of carbon fiber-reinforced composites using dissolved polypropylene”, Composites Science and Technology, 2014;91: 55-62.
23 Yun Hwangbo, Choong-Kwang Lee, Sang-Min Kim, Jae-Hyun Kim, Kwang-Seop Kim, Bongkyun Jang, Hak-Joo Lee, Seoung-Ki Lee, Seong-Su Kim, Jong-Hyun Ahn*, Seung-Mo Lee, “Fracture Characteristics of Monolayer CVD-Graphene”, Scientific Reports , 2014;4:4439-4447.
22 Song Hee Han, Hyun Ju Oh, Seong Su Kim*, “Evaluation of fiber surface treatment on the interfacial behavior of carbon fiber-reinforced polypropylene composites”, Composites Part B, 2014;60;98-105.
21 Seung A Song, Hyun Ju Oh, Bu Ki Kim, Seong Su Kim*, “Novel foaming methods to fabricate activated carbon reinforced microcellular phenolic foams”, Composites Science and Technology, 2013;76:45-51.
20 Song Hee Han, Hyun Chul Lee, Yong Sik Jung, Seong Su Kim*, “The effect of post-processing of carbon fibers on the mechanical properties of epoxy-based composites”, Composite Part B, 2013;45:172-177.
19 Seong Su Kim*, Hideaki Murayama, Kazuro Kageyama, Kiyoshi Uzawa, Makoto Kanai, “Study on the curing process for carbon/epoxy composites to reduce thermal residual stress”, Composites Part A, 2012;43:1197-1202.
18 Seong Su Kim*, Ha Na Yu, Dai Gil Lee, Hideaki Murayama, Kazuro Kageyama, “Tribological behaviors of plsma-treated carbon composite grooved surfaces”, Composite Structures, 2010;92:1039-1046.
17 Ha Na Yu, Seong Su Kim, Jung Do Suh, Dai Gil Lee*, “Axiomatic design of the sandwich composite end plate for PEMFC fuel cell vehicles”, Composite Structures, 2010;92:1504-1511.
16 Ha Na Yu, Seong Su Kim, Jung Do Suh, Dai Gil Lee*, “Composite endplates with pre-curvature for PEMFC (Polymer Electrolyte Membrane Fuel Cell)”, Composite Structures, 2010;92:1498-1503.
15 In Uk Hwang, Ha Na Yu, Seong Su Kim, Dai Gil Lee*, “Integrated Carbon Composite Bipolar Plate for Polymer Electrolyte Membrane Fuel Cells”, Journal of Power Sources, 2009;189:929-934.
14 Seong Su Kim, Ha Na Yu, In Uk Hwang, Dai Gil Lee*, Seong Nam Kim, Kazuyoshi Suzuki, Hiroyuki Sada, “The sliding Friction of Hybrid Composite Journal Bearing under Various Test Conditions”, Tribology Letters, 2009;35:211-219.
13 Seong Su Kim, Ha Na Yu, In Uk Hwang, Dai Gil Lee*, “Development of the Carbon/phenolic Composite Shoulder Bearing”, Composite Structures, 2009;88:26-32.
12 Ha Na Yu, Seong Su Kim, Dai Gil Lee*, “Optimum design of aramid-phenolic/glass-phenolic composite journal bearing”, Composites Part A , 2009;40:1186-1191.
11 In Uk Hwang, Ha Na Yu, Seong Su Kim, Dai Gil Lee*, Jung Do Suh, “Bipolar plate made of carbon fiber epoxy composite for polymer electrolyte membrane fuel cells”, Journal of Power sources, 2008;184:90-94.
10 Seong Su Kim, Ha Na Yu, In Uk Hwang, Dai Gil Lee*, “Characteristics of Wood-polymer Composite for Journal Bearing Materials”, Composite Structures, 2008;86:279-284.
09 Ha Na Yu, In Uk Hwang, Seong Su Kim, Dai Gil Lee*, “Application of natural fiber reinforced composites to trenchless rehabilitation of underground pipes”, Composite Structures, 2008;86: 285-290.
08 Seong Su Kim, Ha Na Yu, Dai Gil Lee*, “Adhesive Joining of Marine Composite Journal Bearings to Backing Metals”, Composites Science and Technology, 2007;67:3417-3424.
07 Seong Su Kim, Hak Gu Lee, Dai Gil Lee*, “Tribological Behaviors of Polymer Coated Carbon Composites under Dry and Water-lubricating Conditions”, Composite Structures, 2007;77: 364-372.
06 Seong Su Kim, Dai Gil Lee*, “Design of the Hybrid Composite Journal Bearing Assembled by Interference Fit”, Composite Structures, 2006;75:222-230.
05 Hak Gu Lee, Seong Su Kim, Dai Gil Lee*, “Effect of compacted wear debris on the tribological behavior of carbon/epoxy composites”, Composite Structures, 2006;74:136-144.
04 Dong Chang Park, Seong Su Kim, Byung Chul Kim, Seung Min Lee, Dai Gil Lee*, “Wear Characteristics of Carbon-Phenolic Woven Composites Mixed with Nano Particles”, Composite Structures, 2006;74:89-98.
03 Seong Su Kim, Hak Gu Lee, Dai Gil Lee*, “Tribological Behaviors of Carbon Composite Grooved Surfaces”, Composite Structures, 2005;71:238-245.
02 Seong Su Kim, Dong Chang Park, Dai Gil Lee*, “Characteristics of Carbon Fiber Phenolic Composite for Journal Bearing Materials”, Composite Structures, 2004;66:359-366.
01 Dai Gil Lee*, Seong Su Kim, “Failure Analysis of Asbestos-Phenolic Composite Journal Bearing”, Composite Structures, 2004;65:37-46.
Domestic Paper
11 Mohamad A. Raja, Su Hyun Lim, Doyun Jeon, Hyunsoo Hong, Inyeong Yang, Sanha Kim, Seong Su Kim*, “An investigation of interfacial strength in epoxy-based solid polymer electrolytes for structural composite batteries” Composites Research, 2023; 36(6): 416-421.
10 Hyunsoo Hong, Kwang Il Jeong, Wonvin Kim, Hyeonseong Jo, Seung Yoon On, Jae-moon Jeong, Seong Su Kim*, “Multifunctional composite spring capable of self-energy harvesting based on triboelectricity for exoskeleton robots”, Transactions of the Korean Society of Mechanical Engineers, 2023, A,47(5),465-469.
09 Hyunsoo Hong, Wonki Kim, Doyun Jeon, Kwanho Lee, Seong Su Kim*, “Prediction of stacking angles of fiber-reinforced composite materials using deep learning based on convolutional neural networks” Composites Research, 2023; 36(1): 48-52.
08 Sangyoon Bae, Hyeonseong Jo, and Seong Su Kim*, “Prediction algorithm for transverse permeability of unidirectional fiber reinforced composites with electric-hydraulic analogy”, Composites Research, 35.5 (2022): 334-339.
07 Kwang Il Jeong, Wonki Kim, Jae-Moon Jeong, Jaehyung Oh, Yun Hyuk Bang, Seong Su Kim*, “A study on the application of carbon fiber reinforced plastics to PTO shafts for aircrafts”, Composites Research, 2021;34(6): 380-386
06 Seong Yeon Park, Seung Yoon On, Seong Su Kim*,”Development of curing process for EMC encapsulation of ultra-thin semiconductor package”, Composites Research, 2021;34(1): 47-50
05 Hyunsoo Hong, Seong Su Kim*, “Effect of microwave irradiation on conformation of crystalline of PVDF nano-composite film in the solvent evaporation process”, Composites Research, 2019; 33(1): 19-24
04 Su-Hyun Lim, Seung Yoon On, Seong Su Kim*, “Study on the flow characteristics of the epoxy resin w.r.t. sizing materials of carbon fibers”, Composites Research, 2018 31(6): 379-384
03 Seung A Song, Seung Yoon On, Go Eun Park, Seong Su Kim*, “Improvement of physical properties for carbon fiber/PA 6,6 composites”, Composites Research, 2017;30:365-370
02 Song Hee Han, Hyun Ju Oh, Seong Su Kim*, “evaluation of mechanical property of carbon fiber/polypropylene composite according to carbon fiber surface treatment”, The Conference of the Korean Society of Mechanical Engineers, 2013;37:791-796
01 Hyun Ju Oh, Seong Su Kim*, “The effect of the core-shell structured meta-aramid/epoxy nanofiber mats on interfacial bonding strength with an epoxy adhesive in cryogenic environments”, Composites Research, 2013;26:129-134
International Conference
75 Hyeonsoo Hong, Kwang Il Jeong, Mohamad A. Raja, Wonki Kim, Seong Su Kim, “Vibrational Isolator of quasi-zero stiffness metamaterials with high loading-carrying capacity and self-sensing”, 23 ICCM, Belfast, UK 2023.08.
74 Jae-Moon Jeong, Dai Jingyao, Acauan Luiz, Kwang Il Jeong, Brian L. Wardle, Seong Su Kim*, “Bipolar plate using horizontally aligned cnt for high-performance vanadium redox flow batteries”, 23 ICCM, Belfast, UK 2023.08.
73 Wonvin Kim, Seong Su Kim*, “3D bulk closed-cell thermoelectric foam for structural elements of a large energy harvesting system”, 23 ICCM, Belfast, UK 2023.08.
72 Wonki Kim, Hyeonseong Jo,Seong Su Kim*, “Effects of triaxial braided patterns on mechanical properties of braided composite materials”, ICCS 26, Porto, Porutugal 2023.06.
71 Wonki Kim, Hyunsoo Hong, Seong Su Kim*, “Effects of triaxial braided patterns on mechanical properties of braided composite materials”, IEEE NEMS 2023, Jeju, Korea 2023.05.
70 Ha Eun Lee, Hyeonseong Jo, Mohamad A. Raja and Seong Su Kim*, “Development of a novel composite battery exterior for the
sustainability of Li-ion pouch cell at high C-rate conditions”, The 18th International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS), Jeju, Korea		 2023.05.
69 Muhammad Salman Sarfraz, Hyunsoo Hong, Seong Su Kim*, “Development of lightweight and energy-efficient thermoplastic-coated soft magnetic composites (SMC) and their Magnetic Properties” IEEE NEMS 2023. Jeju, Korea 2023.05.
68 Seong Yeon Park, Seong Su Kim*, “Preprocess-induced residual stress and geometric characteristics on pressure resisting capability of corrugated shape in primary barriers of liquefied natural gas carriers” The asia-pacific conference on fracture and strength ans the conference on structural integrity and failure 2022 (APCFS/SIF 2022) South australia 2022.12.
67 Seong Yeon Park, Seong Su Kim*, “Electronic packaging enhancement engineered by enhancing the reliability via rapid cooling” The 9th international conference of Asin Society for Precision Engineering and Nanotechnology 2022 (ASPEN 2022), Singapore 2022.11.
66 Jae-Moon Jeong, Kwang-Il Jeong, Dajeong Kang, Seong Su Kim*, The 6th International Conference on Active Materials and Soft Mechatronics (AMSM 2022), Georgia Tech, Atlanta, Georgia, USA 2022.10.
65 Hyunsoo Hong, Woe Tae Kim,and Seong Su Kim*, “A CFRP/GFRP hybrid composite support for double-wall LNG pipe system”, 25th International Conference on Composite Structures – ICCS25, Porto, Portugal 2022.07.
64 Sangyoon Bae, Hyeonseong Jo, Seong Su Kim*, “Prediction of transverse permeability of unidirectional fiber reinforced composites with electric-hydraulic analogy”, 25th International Conference on Composite Structures – ICCS25, Porto, Portugal 2022.07.
63 Jae-Moon Jeong, Kwang Il Jeong, Dajeong Kang, Seong Su Kim*, “Cobalt metal-organic frameworks on carbon felt for the high performance of vanadium redox flow batteries,” International Conference on Precision Engineering and Sustainable Manufacturing 2022(PRESM2022), Jeju, Korea 2022.06.
62 Jae-Moon Jeong, Kwang Il Jeong, Dajeong Kang, Seong Su Kim*, “Cobalt metal-organic frameworks on carbon felt for the high performance of vanadium redox flow batteries,” The 20th European Conference on Composite Materials – ECCM20, Lausanne, Switzerland 2022.06.
61 Hyunsoo Hong and Seong Su Kim*, “Composite spring capable of self-energy harvesting based on triboelectricity for exo-robots”, The 20th European Conference on Composite Materials – ECCM20, Lausanne, Switzerland 2022.06.
60 Dajeong Kang, Jae-Moon Jeong, Kwang Ill Jeong, Seong Su Kim*, “Sandwich type shape memory polymer composite actuators to increase the recovery moment and deformability”, The 20th European Conference on Composite Materials – ECCM20, Lausanne, Switzerland 2022.06.
59 Kwang Il Jeong, Jae-Moon Jeong, Seong Su Kim*, “High-performance carbon felt electrodes of vanadium redox flow batteries”,25th International Conference on Composite of Structures, Porto, Portugal 2022.07.
58 Seung Yoon On, and Seong Su Kim*, “Effects of microwave-assisted cross-linking on the creep resistance and measurement accuracy of the coaxial-structured fiber strain sensor”, 20th European Conference on Composite Materials – ECCM20, Lausanne, Switzerland 2022.06.
57 Su Hyun Lim, Wonvin Kim, Seong Su Kim*, “Tensile strength of carbon fiber tow/epoxy composites with respect to the microstructure of carbon fiber tow”, 20th European Conference on Composite Materials – ECCM20, Lausanne, Switzerland 2022.06.
56 Kwang Il Jeong, Nils Demski, Dirk Oberschmidt, Seong Su Kim*, “Integrated composite bipolar plate-electrode design to reduce contact resistance in vanadium redox flow batteries”,the 20th European Conference on Composite Materials – ECCM20, Lausanne, Switzerland 2022.06.
55 Hyunsoo Hong and Seong Su Kim*, “Prediction of running kinetic parameters by using the artificial neural network from self-sensing composite structures for exoskeleton robots”, The 8th KAIST-SJTU-UTokyo Joint Academic Symposium 2021.10
54 Seong Yeon Park and Seong Su Kim, “The study on the curing process for EMC encapsulation to reduce the warpage of ultra-thin semiconductor package”,24th International Conference on Composite Structures – ICCS24, Porto, Portugal 2021.06.
53 Muhammad Salman Sarfraz, and Seong Su Kim*, “Magnetic Properties of Polymer-Coated Soft Magnetic Composites for Electric Motor Core Applications with Low Core Losses”, 24th International Conference on Composite Structures-ICCS24, Porto, Portugal 2021.06
52 Kwang Il Jeong and Seong Su Kim*, “An integrated electrode with the bipolar plate / current collectro to reduce contact resistance in vanadium redox flow batteries”, 24th International Conference on Composite Structures-ICCS24, Porto, Portugal 2021.06.
51 Woe Tae Kim and Seong Su Kim*, “Evaluation of a pressure resistance performance of composite cylinder using the mechanically structured ring burst test device”, 24th International Conference on Composite Structures-ICCS24, Porto, Portugal 2021.06.
50 Hyunsoo Hong and Seong Su Kim*, “GFRP/CFRP hybrid composites with self-sensing capability for the ankle spring of exoskeleton robot”,24th International Conference on Composite Structures-ICCS24, Porto, Portugal 2021.06.
49 Hugon Lee and Seong Su Kim*, “A study on the optimal curing process of filament wound tow-preg laminated composites through multi-scale modeling”, 24th International Conference on Composite Structures-ICCS24, Porto, Portugal 2021.06.
48 Wonvin Kim and Seong Su Kim*, “Optimization of the material properties of the composites for load-carrying capacity in water-lubricated journal bearings”, 24th International Conference on Composite Structures-ICCS24, Porto, Portugal 2021.06.
47 Dajeong Kang and Seong Su Kim*, “Sandwich type shape memory polymer composite to increase the recovery force for space deployable structures”, 24th International Conference on Composite Structures-ICCS24, Porto, Portugal 2021.06.
46 Wonvin Kim, Seong Su Kim*, “A study of elastohydrodynamic lubrication for the water-lubricated composite journal bearing”, 2nd Korea-Tribology International Symposium, Seoul, Korea 2020.11.
45 Woe Tae Kim, Seong Su Kim*, ”Design method of a segment-type ring burst test device to estimate burst property of composite pressure vessels”, Asia-Pacific Conference on Fracture and Strength 2020, Jeju, Korea 2020.11.
44 Hyunsoo Hong, Jaemoon Jeong, and Seong Su Kim*, “Poly(vinylidene fluoride)/TiO2 film fabrication with microwave-assisted solvent evaporation: An experimental and molecular dynamics study”, Asia-Pacific Conference on Fracture and Strength 2020 – APCFS2020, Jeju, Korea 2020.11.
43 Jaemoon Jeong, Soohyun Eum, Seong Su Kim*, “Study on the flow front monitoring in vacuum assisted resin transfer molding (VARTM) by using an optical fiber distributed sensor”, 22th International Conference on Composite Structures – ICCS22, Wuhan, China 2019.11.
42 Su Hyun Lim, Seung Yoon On, Seong Su Kim*, “Effect of sizing agents of carbon fibers on the resin flow characteristics and the interfacial adhesion with epoxy matrix”, 22th International Conference on Composite Structures – ICCS22, Wuhan, China 2019.11.
41 Hyunsoo Hong and Seong Su Kim*, “Effect of microwave-irradiation on phase transformation of Pply (vinylidene fluoride) nano-composite film in the solvent evaporation process: an experimental and molecular dynamics Study”, 22th International Conference on Composite Structures – ICCS22, Wuhan, China 2019.11.
40 Seong Yeon Park, Seongsu Kim*, “Pressure-resisting capability of the corrugated stainless-steel membrane as the primary barriers for the LNG containment system”, 2019 THE SYMPOSIUM OF SJTU-TOKYO-KAIST 2019.10.
39 Kwang Il Jeong and Seong Su Kim*, “Glucose-based carbon-coating layer on carbon felt electrodes of vanadium redox flow batteries”, 4th International Workshop on Active Materials and Soft Mechatronics – AMSM2019, Incheon, Korea 2019.10.
38 Seung Yoon On and Seong Su Kim*, “Preparation of core-shell structured fiber sensors by using dry-jet wet spinning for structural health monitoring of composite structures“ Best paper award, The international conference on active materials and soft mechatronics (AMSM), Incheon, Korea 2019.10.
37 Seung Yoon On and Seong Su Kim*, “Study on the core-shell structured fiber type strain sensor with load bearing chracteristics in composite structures”, 22nd International Conference on Composite Materials – ICCM 22, Melbourne, Australia 2019.08.
36 Woe Tae Kim and Seong Su Kim*, “Evaluation of mechanical properties of composite pressure vessels using a segment-type ring burst test device”, 22nd International Conference on Composite Materials – ICCM22, Melbourne Australia 2019.08.
35 Seung Yoon On and Seong Su Kim*, “Dry-jet wet spun core-shell structured strain sensors for damage monitoring of the composite structures”, 6th International Symposium Frontiers in Polymer Science, Budapest, Hungary 2019.05
34 Kwang Il Jeong, Seung-A Song and Seong Su Kim*, “Effect of glucose coating layer on surface modification of carbon felt electrodes for vanadium redox flow batteries”, 3rd International Workshop on Active Materials and Soft Mechatronics – AMSM2018, Daejeon, Korea 2018.10.
33 Hyunsoo Hong and Seong Su Kim*, “Study on the conformation of crystalline structure in PVDF/PVA composite film”, 3rd International Workshop on Active Materials and Soft Mechatronics – AMSM2018, Daejeon, Korea 2018.10.
32 Kwang Il Jeong and Seong Su Kim*, “Study on the carbon felt electrodes with conductive coating for vanadium redox flow batteries”, 21th International Conference on Composite Structures – ICCS21, Bolonga, Italy 2018.09.
31 Hyunsoo Hong, Seung-A Song and Seong Su Kim*, “Effect of electrospun PVA nanofiber mats on the transformation of crystalline structures of PVDF film”, 21th International Conference on Composite Structures – ICCS21, Bolonga, Italy 2018.09.
30 Seung A Song and Seong Su Kim*, “Fabrication of carbon foam derived from carbonization of phenolic foam with open cell”, 21th International Conference on Composite Structures – ICCS21, Bolonga, Italy 2018.09.
29 Su-Hyun Lim, Seung Yoon On and Seong Su Kim*, “Effect of sizing of carbon fibers on flow characteristics of epoxy resins”, Emerging Technologies in Mechanical Engineering 2018 – ETME2018, Jeju, Korea 2018.08.
28 Seung A Song and Seong Su Kim*, “Growth of zinc oxide nanorodes with respect to surface condition of carbon fiber and post annealing” Asian textile conference-13, Victoria, Australia 2015.11.
27 Seung Yoon On, and Seong Su Kim*, “Failure analysis of the meta-aramid/epoxy nanofiber mats reinforced epoxy adhesive joint in cryogenic environments”, International conference on advances in mechanics of composite materials and structures (Composite seoul 2015), Seoul, Korea 2015.10.
26 Seung A Song and Seong Su Kim*, “Mechanical and thermal characteristics of the carbon fiams derived from phenolic resin mixed with polyacrylonitrile (PAN),” Advances in mechanics of composite materials and structures, Seoul, Korea 2015.10.
25 Kang Yeong Choe, Seong Su Kim*, “Study of the durability of composite tilting pad journal bearing for turbo compressor system under the oil-cut situation”, International Conference on Advances in Mechanics of Composite Materials and Structures (CompositesSeoul 2015), Seoul, Korea 2015.10.
24 Seung Yoon On, Seung A Song, Daichi Wada, Murayama Hideaki, Seong Su Kim*, “The influence of the meta-aramid nanofiber mats on the adhesion strength”. 20th International Conference on Composite Materials (ICCM20), Denmark 2015.07
23 Ha Eun Lee, Song Hee Han, Seong Su Kim*, “Development of carbon fiber reinforced thermoplastic composite bipolar plates for polymer electrolyte membrane fuel cell”. 18th International Conference on Composite Structures (ICCS18), Portugal 2015.06
22 Kang Yeong Choe, Seung Yoon On, Jun Il You, Seong Su Kim*, “Development of the composite journal bearing for turbine/generator applications”. 18th International Conference on Composite Structures (ICCS18), Portugal 2015.06
21 Kun Jeong, Seong Su Kim*, “Fabrication of the thermoplastic composite impact sensor usable at cryogenic environment”. 18th International Conference on Composite Structures (ICCS18), Portugal 2015.06
20 Seung A Song, Seong Su Kim*, “Novel grafting methods on the carbon fiber using zinc oxide nano-rods”, 18th International Conference on Composite Structures (ICCS18), Portugal 2015.06
19 Ha Eun Lee, Song Hee Han, Seong Su Kim*, “Development of carbon fiber reinforced thermoplastic composite bipolar plates for polymer electrolyte membrane fuel cell”, 31th International Conference of the Polymer Processing Society (PPS31), Korea 2015.06.
18 Seung A Song, Seong Su Kim*, “Surface characteristics of zinc oxide coated carbon fibers”, 31th International Conference of the Polymer Processing Society (PPS31), Korea 2015.06.
17 Seung Jin See, Song Hee Han, Seong Su Kim*, “Effect of transistion of crystal morphology on interfacial properties of carbon fiber reinforced polypropylene composite through Al2O3 surface treatment”, 9th Asian-Australasian Conference on composite Materials, Suzhou, China 2014.10.
16 Seung A Song, Seong Su Kim*, “The mechanical and thermal characteristics of phenolic foams reinforced with carbon nanoparticles”, ECCM16, Spain 2014.
15 Hyun Ju Oh, Seong Su Kim*, “Dispersion of graphene using the electrostatic repulsion force by electrospray method”, ECCM16, Spain 2014.
14 Song Hee Han, Seong Su Kim*, “Study on the high-speed RTM to reduce the impregnation time for carbon/epoxy composites”, MECHCOMP2014, USA 2014.
13 Seung Yoon On, Seong Su Kim*, “Novel dispersion method of graphene for graphene/epoxy composites by electrostatic force”, ISGMA2013, USA 2013.
12 Seung A Song, Seong Su Kim*, “Mechanical and thermal characteristics of the micro/nano-particles reinforced phenolic foams”, ISGMA2013, USA 2013.
11 Song Hee Han, Seong Su Kim*, “Evaluation of the impregnation characteristics of the carbon fiber reinforced composites using dissolved polypropylene”, The 19th International Conference on Composite Materials (ICCM19), Canada 2013.
10 Hyun Ju Oh, Seong Su Kim*, “Effect of residual solvent and CaCl2 on mechanical properties of electrospun meta aramid nanofiber/epoxy adhesives”, The 19th International Conference on Composite Materials (ICCM19), Canada 2013.
09 Seung A Song, Seong Su Kim*, “Mechanical and thermal characteristics of the micro/nano-particles reinforced phenolic foams”, The 19th International Conference on Composite Materials (ICCM19), Canada 2013.
08 Song Hee Han, Seong Su Kim*, “A study of high-speed RTM through thickness direction for reducing impregnation time”, 16th International Conference on Composite Structures (ICCS16), Portugal 2013.
07 Hyun Ju Oh, Seong Su Kim*, “Failure mode analysis of the meta aramid nanofiber reinforced adhesive joints at cryogenic temperatures”, 16th International Conference on Composite Structures (ICCS16), Portugal 2013.
06 Hyun Chul Lee, Seong Su Kim*, “Development of the composite strut top plate for automobiles”, 15th International Conference on Composite Structures (ICCS15), Portugal 2011.
05 Song Hee Han, Seong Su Kim*, “The effect of post-processing of carbon fibers on the mechanical properties of epoxy-based composites”, The 18th International Conference on Composite Materials (ICCM18), Korea 2011.
04 Song Hee Han, Seong Su Kim*, “The effect of coupling agents on the mechanical properties of carbon fiber reinforced polypropylene composites”, The 20th International Conference on Compoistes/Nano Engineering (ICCE20), China 2012.
03 Seong Mi Yu, Seong Su Kim*, “Influence of wet spinning parameter and post heat treatment on Crystalline Structure of Poly(vinylidene Fluoride)”, The 20th International Conference on Compoistes/Nano Engineering (ICCE), China 2012.
02 Seung A Song, Seong Su Kim*, “Novel foaming methods to fabricate the activated carbon reinforced microcellular phenolic foams”, 15th European Conference on Composite Materials (ECCM), Italy 2012.
01 Hyun Ju Oh, Seong Su Kim*, “The effects of the core-shell structured meta-aramid/epoxy nanofiber mats on the epoxy adhesive joints at cryogenic temperatures,” 15th European Conference on Composite Materials (ECCM), Italy 2012.
Domestic Conference
102 Doyun Jeon, Jae-Moon Jeong, Su Hyun Lim, Mohamad A. Raja, Seong Su Kim*, “Design of Sandwich Type Structural Battery capable of Pressurization and Thermal Management System” The 2023 Fall Conference of the Korean Society for Aeronautical and Space Science. 2023.11.
101 Doyun Jeon, Su Hyun Lim, Mohamad A. Raja, Seong Su Kim*, “Design of Sandwich Type Structural Battery Skin with Integrated Pressurization System for Life Extension” The 2023 Fall Conference of the Korean Society for Mechanical Engineers. 2023.11.
100 Mohamad A. Raja, Su Hyun Lim, Doyun Jeon, Ha eun Lee, Seong Su Kim*, “Micromechanics Modelling of Interfacial Strength and Matrix Plasticity in Epoxy-based Solid Polymer Electrolytes for Carbon Fiber Reinforced Structural Composite Batteries”, The 2023 Fall Conference of the Korean Society for Mechanical Engineers. 2023.11.
99 Wonki Kim, Hyunsoo Hong, Seong Su Kim*, “AI를 활용한 원통형 복합재 구조 배터리 최적화”, The 2023 Fall Conference of the Korean Society for Precision Engineering. 2023.11.
98 Sangyoon Bae, Gyumin Sim, Seong Su Kim*, “A Study on Resin Pressure and Laminate Thickness Changes During Consolidation of Continuous Fiber Reinforced Thermosetting Polymer”, The 2023 Fall Conference of the Korean Society for Precision Engineering. 2023.11.
97 Doyun Jeon, Jae-Moon Jeong, Su Hyun Lim, Mohamad A. Raja,Seong Su Kim*, “Design of Sandwich Type Structural Battery capable of Pressurization and Thermal Management System”, The 2023 Fall Conference of the Korean Society for Aeronautical and Space Sciences. 2023.11.
96 Doyun Jeon, Su Hyun Lim, Mohamad A. Raja,Seong Su Kim*, “Design of Sandwich Type Structural Battery Skin with Integrated Pressurization System for Life Extension”, The 2023 Fall Conference of the Korean Society for Composite Materials. 2023.11.
95 Samuel Kim, Hyunsoo Hong, Seong Su Kim*, “Meta-structure design for load bearing and tunable vibration attenuation”, The 2023 Fall Conference of the Korean Society for Composite Materials. 2023.11.
94 Mohamad A. Raja, Su Hyun Lim, Doyun Jeon,Haeun Lee, Seong Su Kim*, “Micromechanics Modelling of Interfacial Strength and Matrix Plasticity in Epoxy-based Solid Polymer Electrolytes for Carbon Fiber Reinforced Structural Composite Batteries”, KSME Annual Meeting 2023 International Session. 2023.11.
93 Hyunsoo Hong, Wonki Kim, Samuel Kim, Seong Su Kim*, “머신러닝을 이용한 진동 저감의 준영강성 메타구조 최적설계”, The 2023 Fall Conference of the Korean Society for Mechanical Engineers. 2023.11.
92 Wonvin Kim, Suhyun Lim, Hyunsoo Hong, Seong Su Kim*, “Dynamic instability analysis of the water-lubricated journal bearing system”, The 2023 Fall Conference of the Korean Society for Mechanical Engineers. 2023.11.
91 Seungyoon On,Seong Su Kim*, “복합재 경화 모니터링을 위한 동축 섬유형 센서의 개발”, The 2023 Fall Conference of the Korean Society for Mechanical Engineers. 2023.11.
90 Jae-Moon Jeong, Kwang Il Jeong, Hyunsoo Hong, Seong Su Kim*, “수평으로 정렬된 탄소나노튜브를 이용한 고성능 바나듐 레독스 플로우 배터리용 분리판 설계”, The 2023 Fall Conference of the Korean Society for Mechanical Engineers. 2023.11.
89 Wonvin Kim, Hyunsoo Hong, Su Hyun Lim,Seong Su Kim*, “Dynamic stability analysis based on dynamic coefficients in water-lubricated journal bearing system”, The 2023 Fall Conference of the Korean Tribology Society. 2023.10.
88 Jae-Moon Jeong, Kwang Il Jeong,Seong Su Kim*, “Horizontally Aligned CNTs: A Breakthrough in Bipolar Plate Technology for Vanadium Redox Flow Batteries”, The 2023 Spring Conference of the Korean Society for Mechanical Engineers. 2023.06.
87 Su Hyun Lim, Seong Su Kim*, “섬유 배열 인자의 정량화 및 탄소섬유 토우/에폭시 복합재료 인장 강도에 미치는 영향에 관한 연구”, The 2023 Spring Conference of the Korean Society for Mechanical Engineers. 2023.06.
86 Wonki kim , Hyunsoo Hong, Doyun Jeon, Kwanho Lee, Seong Su Kim*, “링 버스트 시험을 통한 원통형 복합재 물성 도출 방법에 대한 고찰”, The 2023 Spring Conference of the Korean Society for Composite Materials 2023.04.
85 Mohamad A. Raja , Su Hyun Lim, Doyun Jeon,Seong Su Kim*, “Design of Multifunctional Structural Composite Battery using Interfacial Prediction and Multiphysics Modelling”, The 2023 Spring Conference of the Korean Society for Composite Materials. 2023.04.
84 Doyun Jeon, Su Hyun Lim, Mohamad A. Raja, Seong Su Kim*, “Design of Sandwich Type Structural Battery Capable of Pressurization to Improve Capacity Fade of Lithium Ion Battery”, The 2023 Spring Conference of the Korean Society for Composite Materials. 2023.04.
83 Jae-Moon Jeong, Kwang Il Jeong, Dajeong Kang, Seong Su Kim*, “Carbon Felt Electrodes for Vanadium Redox Flow Batteries Treated with Cobalt Metal-organic Frameworks,” The 2022 Spring Conference of the Korean Society for Mechanical Engineers. 2022.06.
82 Jae-Moon Jeong, Kwang Il Jeong, Dajeong Kang, Seong Su Kim*, “Carbon Felt Electrodes for Vanadium Redox Flow Batteries Treated with Cobalt Metal-organic Frameworks Using Microwave Irradiation,” The 2022 Spring Conference of the Korean Society for Precision Engineering. 2022.05.
81 Wonvin Kim, Su Hyun Lim, Wonki Kim, Hyeongseong Jo, Mohamad Raja, Seong Su Kim*, “A study of the water-lubricated composite journal bearing including the turbulence, inertial effect, and the elastic deformation of the composite,” The 2022 Spring Conference of the Korean Tribology Society. 2022.04.
80 Hyunsoo Hong, Seong Su Kim*, “자체 변형 센싱이 가능한 정전 용량 기반 유전체 폼 코어 샌드위치 복합재료 구조”, The 2022 Spring Conference of the Korean Society for Mechanical Engineers. 2022.06.
79 Hyunsoo Hong, Seong Su Kim*, “변형율 센싱이 가능한 복합재료 발목 스프링을 이용한 달리기 운동에 따른 지면 반력 도출”, The 2022 Spring Conference of the Korean Society for Precision Engineering. 2022.05.
78 Hyunsoo Hong, Kwang Il Jeong, Seung Yoon On, Seong Su Kim*, “강화 학습 기반의 머신러닝 모델을 이용한 고하중 지지 능력을 가지는 에폭시/고무 복합재료 진동 저감기 최적 설계”, The 2022 Fall Conference of the Korean Society for Mechanical Engineers. 2022.11.
77 Hyeonseong Jo, Sangyoon Bae, Seong Su Kim*, “Transverse permeability prediction model based on simplified fiber-reinforced composite representative volume elements with electric-hydraulic analogy solver”, The 2022 Fall Conference of the Korean Society for Mechanical Engineers. 2022.11.
76 Sangyoon Bae, Hyeonseong Jo, Seong Su Kim*, “섬유 강화 복합재료의 수직 방향 투수 계수 예측을 위한 유동 네트워크 알고리즘”, The 2022 Fall Conference of the Korean Society for Mechanical Engineers. 2022.11.
75 Wonki Kim, Seong Su Kim*, “3축 브레이딩 조건에 따른 복합재료 프리폼의 다이아몬드 패턴 변화 분석”, The 2022 Fall Conference of the Korean Society for Mechanical Engineers. 2022.11.
74 Hyunsoo Hong, Kwang Il Jeong, Seung Yoon On, Seong Su Kim*, “DQN 강화 학습을 이용한 고하중 지지용 복합소재 진동 저감 마운트 최적 설계”, The 2022 Fall Conference of the Korean Society for Composite Materials. 2022.11.
73 Doyun Jeon, Kwang Il Jeong, Su Hyun Lim, Seong Su Kim*, “굽힘 강도 강화를 위한 샌드위치 형태 구조배터리 코어 설계”, The 2022 Fall Conference of the Korean Society for Precision Engineering. 2022.10.
72 Hyunsoo Hong, Kwang Il Jeong, Seung Yoon On, Seong Su Kim*, “강화 학습을 통한 아치 구조의 복합소재 진동 저감 마운트 구조 최적 설계”, The 2022 Fall Conference of the Korean Society for Precision Engineering. 2022.10.
71 Hyeonseong Jo, Sangyoon Bae, Hyunsoo Hong, Seong Su Kim*, “Delaunay Cell-based Prediction Model for Transverse Permeability of Fiber-Reinforced Composite Representative Volume Elements with Electric-Hydraulic Analogy Solver”, The 2022 Fall Conference of the Korean Society for Precision Engineering. 2022.10.
70 Sangyoon Bae, Hyeonseong Jo, Seong Su Kim*,  “Prediction of Transverse permeability of Unidirectional Fiber Reinforced Composites with Electric-Hydraulic analogy”, The 2022 Spring Conference of the Korean Society for Composite Materials. 2022.05.
69 Wonvin Kim, Su Hyun Lim, Wonki Kim, Hyeongseong Jo, Mohamad A. Raja, Seong Su Kim*, “A Study on the Water-lubricated Composite Journal Bearing Including the Turbulence, Inertial Effect, and the Elastic Deformation of the Composite,” Korean Society of Tribologists and Lubrication Engineers. 2022.04.
68 Seong Yeon Park, Seong Su Kim*, “LNG 선의 1차 방벽 주름부의 내압 성능 분석을 위한 잔류응력 및 기하학적 형상에 관한 연구”, The 2021 Fall Conference of the Korean Society for Mechanical Engineers. 2021.11.
67 Seong Yeon Park, Seong Su Kim*, “초박형 반도체 패키지의 휨을 줄이기 위한 EMC 경화 공정 개발에 관한 연구” The 2021 Fall Conference of the Korean Society for Composite Materials. 2021.11.
66 Seung Yoon On, Seong Su Kim*, “내크리프성이 향상된 동축 섬유형 변형률 센서의 계측 특성에 관한 연구”, The 2021 Fall Conference of the Korean Society for Mechanical Engineers. 2021.11
65 Wonvin Kim, Wonki Kim, Hyeongseong Jo, Seong Su Kim*, “Development of the thermoelectric foam for energy harvesting in a large insulation system”, The 2021 Fall Conference of the Korean Society for Composite Materials. 2021.11.
64 Wonvin Kim, Wonki Kim, Seong Su Kim*, “Development of the 3D bulk micro-foam thermoelectric material for large energy harvesting system”, The 2021 Fall Conference of the Korean Society for Mechanical Engineers. 2021.10.
63 Kwang Il Jeong, Jaehyung Oh, Jaemoon Jeong, Seong Su Kim*, “바나듐 레독스 흐름 전지용 분리판-전극 일체형 구조에 관한 연구”, The 2021 Spring Conference of the Korean Society for Composite Materials. 2021.06.
62 Woe Tae Kim and Seong Su Kim*, “링 버스트 시험법을 활용한 Carbon/epoxy 필라멘트 와인딩 복합재료의 파괴 인성 특성 분석”, The 2021 Spring Conference of the Korean Society for Mechanical Engineers. 2021.06.
61 Hyunsoo Hong, Seong Su Kim*, “자체 변형 측정이 가능한 유전체 폼 코어 샌드위치 복합재료 구조” The 2021 Spring Conference of the Korean Society for Mechanical Engineers. 2021.06.
60 Seung Yoon On, Seong Su Kim*, “동축 섬유형 센서의 크리프 및 계측 특성 향상을 위한 마이크로웨이브 후처리 공정에 관한 연구”, The 2021 Spring Conference of the Korean Society for Composite Materials. 2021.06.
59 Su Hyun Lim, Seong Su Kim*, “섬유 정렬도 및 사이징제가 탄소섬유 토우 인장 강도에 미치는 영향”, The 2021 Spring Conference of the Korean Society for Mechanical Engineers. 2021.06.
58 Dajeong Kang, Jae-Moon Jeong, Kwang Il Jeong, Seong Su Kim*, “샌드위치 구조 형상기억고분자복합재 액추에이터의 복원력 향상에 관한 연구”, 2021 The Spring Conference of the Korean Society for Mechanical Engineers. 2021.06.
57 Woe Tae Kim, Seong Su Kim*, “기계적 구조의 링 버스트 시험 장치를 활용한 복합재료 압력용기의 내압 성능 평가” The 2020 Fall Conference of the Korean Society for Mechanical Engineers. 2020.12.
56 Seungyoon On, Seong Su Kim*, “Study on the core-fiber post-treatment for improving the creep resistance of polymer fiber sensors” The 2020 Fall Conference of the Korean Society for Mechanical Engineers. 2020.12.
55 Hyunsoo Hong, Seong Su Kim*, “마이크로웨이브 처리를 이용하여 제작한 PVDF/TiO2 나노 복합재료 필름의 결정형 구조에 대한 연구” The 2020 Fall Conference of the Korean Society for Mechanical Engineers. 2020.12.
54 Jaemoon Jeong, Seong Su Kim*, “전해질의 흐름 특성을 향상시키기 위해 Pseudo-channel 효과가 있는 바나듐 레독스 흐름 전지의 카본 페이퍼 적층전극 설계” The 2020 Fall Conference of the Korean Society for Mechanical Engineers. 2020.12.
53 Kwang Il Jeong, Seong Su Kim*, “바나듐 레독스 흐름 전지용 탄소 펠트 전극의 탄소 코팅층에 관한 연구” The 2020 Fall Conference of the Korean Society for Composite Materials. 2020.11.
52 Won Vin Kim, Seong Su Kim*, “Optimization of the material properties of the composite for load-carrying capacity in water-lubricated journal bearings”, The 2020 Fall Conference of the Korean Society for Composite Materials. 2020.11.
51 Su Hyun Lim, Seong Su Kim*, “사이징제 및 섬유 정렬 정도에 따른 탄소섬유 토우의 인장 강도에 관한 연구” The 2020 Fall Conference of the Korean Society for Composite Materials. 2020.11.
50 Seong Yeon Park, Seung Yoon On, Seong Su Kim*, “초박형 반도체 패키지의 EMC encapsulation 경화 공정 개발에 관한 연구” The 2020 Fall Conference of the Korean Society for Composite Materials. 2020.11.
49 Seong Yeon Park, Seung Yoon On, Seong Su Kim*, “Development of Manufacturing Process for EMC encapsulation of Ultra-thin Semiconductor Package”, The 2020 Conference of the Korean Society for Precision Engineering. 2020.09.
48 Muhammad Salman Sarfraz, Kwang Il Jeong, Seong Su Kim*, “Magnetic Properties of Polymer Coated Metal Powder Composites for Electric Motor Core Applications”, The 2020 Conference of the Korean Society for Precision Engineering. 2020.09.
47 Woe Tae Kim, Su Hyun Lim, Hugon Lee, Seong Su Kim*, ”복합재료 압력용기의 기계적 물성 평가를 위한 세그먼트 타입의 링 버스트 장치의 설계”, The 2020 Conference of the Korean Society for Precision Engineering. 2020.09.
46 Wonvin Kim, Seong Su Kim*, “A study of Elastohydrodynamic lubrication for the water-lubricated composite journal bearing”, The 69th Conference of the Korean Tribology Society. 2020.09.
45 Seung Yoon On, Seong Su Kim*, “계측 정확도 향상을 위한 동축 섬유형 변형률 센서의 코어 섬유 후처리 공정에 관한 연구” The 2020 Spring Conference of the Korean Society for Composite Materials. 2020.08.
44 Jaemoon Jeong, Jaehyung Oh, Kwang Il Jeong, Seong Su Kim*, “Pseudo-channel 효과가 있는 바나듐 레독스 흐름 전지 카본 페이퍼 적층 전극 설계” The 2020 Spring Conference of the Korean Society for Composite Materials. 2020.08.
43 Hugon Lee, Gyeongsu Jeong, Seongsu Kim*, “필라멘트 와인딩 압력용기 제작을 위한 경화 사이클 최적화 기술 개발” The 2020 Spring Conference of the Korean Society for Composite Materials. 2020.08.
42 Jaehyung Oh, Gyeongsu Jeong, Seong Su Kim*,  “Study on Resin Flow Numerical Analysis Reflecting In-situ Compaction Behavior of Tow-prepreg Laminate According to Cure Cycle”, The 1st Korea-China-Japan Joint Symposium. 2019.12.
41 Seung Yoon On, Seong Su Kim*, “하중 지지 능력이 우수한 하이브리드 동축 섬유형 변형률 센서의 계측 특성 향상에 관한 연구”, The 2019 Fall Conference of the Korean Society for Composite Materials. 2019.12.
40 Woe Tae Kim, Seong Su Kim*, ” Evaluation of Mechanical Properties of Composite Pressure Vessel using Segment-type Ring Burst Test Device”, The Fall Conference of the Korean Society for Composite Materials. 2019.12.
39 Gyeongsu Jeong, Jaehyung Oh, Seong Su Kim*,  “경화 사이클에 따른 토우프리프레그 라미네이트 내 수지 유동에 관한 연구” The 2019 Fall Conference of the Korean Society of Propulsion Engineers. 2019.11.
38 Seung A Song, Seong Su Kim*, “탄소섬유 강화 열가소성 플라스틱 복합재료의 계면전단강도 향상에 대한 연구”, The 2019 Fall Conference of the Korean Society of Industry Convergence. 2019.11.
37 Seong Yeon Park, Seong Su Kim*, “ LNG 선의 1차 방벽 스테인리스 스틸 멤브레인 주름부의 내압 성능에 관한 연구”, The 2019 Fall Conference of the Korean Society for Mechanical Engineers. 2019.11.
36 Hyunsoo Hong, Seong Su Kim*, “분자동역학 전산 모사를 이용한 마이크로웨이브 조사가 PVDF 결정형 변화 (결정화도)에 미치는 영향 연구” The 2019 Fall Conference of the Korean Society for Mechanical Engineers. 2019.11.
35 Woe Tae Kim and Seong Su Kim*, “세그먼트 타입의 링 버스트 시험 장치를 활용한 복합재료 압력용기의 기계적 물성 평가”, The 2019 Conference of Korea Institute of Military Science and Technology. 2019.06.
34 Hyunsoo Hong, Seong Su Kim*, “분자 동역학 전산모사를 이용한 TiO2 나노 입자 보강 PVDF의 결정형 변화에 관한 연구” The 2019 Spring Conference of the Korean Society for Composite Materials. 2019.04.
33 Jaemoon Jeong, Seong Su Kim*, “VaRTM 공정에서 optical fiber distributed sensor을 이용한 수지 유동 모니터링에 관한 연구” The 2019 Spring Conference of the Korean Society for Composite Materials. 2019.04.
32 Su Hyun Lim, Seungyoon On, Seong Su Kim*, “사이징에 따른 에폭시 수지 및 탄소섬유의 물리적 화학적 호환성에 관한 연구” The 2019 Spring Conference of the Korean Society for Composite Materials. 2019.04.
31 Seung Yoon On, Seong Su Kim*, “하중 지지가 가능한 UHMWPE/CNT/PU 다층 구조의 섬유형 Strain sensor 개발에 관한 연구” The 2018 Fall Conference of the Korean Society for Composite Materials. 2018.11.
30 Hyunsoo Hong, Seong Su Kim*, “용매 증발 과정 중 마이크로웨이브 처리가 PVDF 필름의 결정화 형태에 미치는 영향” The 2018 Fall Conference of the Korean Society for Composite Materials. 2018.11.
29 Yun Seong Kim, Seong Su Kim*, “Groove Shape Optimization of Composite Slider Bearing Under Low Speed and Heavy Load” The 2018 Spring  Conference of the Korean Society of Tribologists and Lubrication Engineers. 2018.04.
28 Seung Yoon On, Yun Seong Kim, Seong Su Kim*, “Dynamic characteristics of carbon fiber composite tilting pad journal bearing”, The 2018 Spring  Conference of the Korean Society of Tribologists and Lubrication Engineers. 2018.04.
27 Su Hyun Lim, Seong Su Kim*, “탄소섬유 사이징에 따른 에폭시 수지 유동 특성에 관한 연구” The 2018 Spring Conference of the Korean Society for Composite Materials. 2018.04.
26 Kwang Il Jeong, Seong Su Kim*, “금속 산화물 나노 구조체를 이용한 바나듐 레독스 흐름 전지용 전극 연구” The 2018 Spring Conference of the Korean Society for Composite Materials. 2018.04.
25 Seung A Song and Seong Su Kim*, 폴리프로필렌과 탄소섬유 사이의 계면 결합력 향상을 위한 ZnO nanorods 성장,“ The 2016 Spring Conference of the Korean Society for Mechanical Engineers. 2016.04.
24 Seung Yoon On and Seong Su Kim*, “The influence of the microwave treated meta-aramid nanofiber mats on the adhesion strength” The 2016 Spring Conference of the Korean Society of Mechanical Engineers. 2016.04.
23 Soo Jin Ham, Seung A Song and Seong Su Kim*, “The influence of AlOOH sol and silane coupling agent on the interfacial strength of carbon fiber-reinforced polypropylene composites” The 2016 Spring Conference of the Korean Society of Mechanical Engineers. 2016.04.
22 Ha Eun Lee and Seong Su Kim*, “Sol-gel 방법과 Double percolation effect 를 적용한 PEMFC 용 탄소섬유 복합재료 분리판 제조 공정”, The 2016 Spring Conference of the Korean Society for Mechanical Engineers. 2016.04
21 Go Eun Park, Seung A Song, Seong Su Kim*, “Effect of crystal morphology with respect to solvent evaporation rate on interfacial shear strength of carbon fiber/polyamide66 composites”, The 2016 Spring Conference of the Korean Society for Mechanical Engineers. 2016.04
20 Ha Eun Lee, Song Hee Han, Seong Su Kim*, “Development of carbon fiber reinforced thermoplastic composite bipolar plates for polymer electrolyte membrane fuel cell”, The 2015 Spring Conference of the Korean Society for Composite Materials. 2015.05.
19 Seung A Song, Seong Su Kim*, “Study on the improvement of interfacial shear strength by zinc oxide growth on the carbon fiber”, The 2015 Spring Conference of the Korean Society for Composite Materials. 2015.05.
18 Kang Yeong Choe, Seung Yoon On, Jun Il You, Seong Su Kim*, “Development of the composite journal bearing for turbine/generator applications” The 2015 Spring Conference of the Korean Society for Mechanical Engineers. 2015.04
17 Da Hye Kim, Seung A Song Kun Jeong, and Seong Su Kim*, “Effect of microwave treatment on the piezoelectric property of the electrospun PVDF nanofibers reinforced with MWCNT,” The 2014 Fall Conference of the Korean Society for Composite Materials. 2014.11.
16 Seung Jin See, Song Hee Han, Seong Su Kim*, “Improvement of interfacial strength between carbon fibers and polypropylene by AlOOH-sol treatment”, The 2014 Fall Conference of the Korean Society for Composite Materials. 2014.11.
15 Seung A. Song, Seong Su Kim*, “Effect of the coupling agent on the mechanical properties of carbon/PVDF composite,” The 2014 Fall Conference of the Korean Society for Composite Materials. 2014.11.
14 Seung Jin See, Song Hee Han, Seong Su Kim*, “Study on high-speed RTM to reduce the impregnation time for carbon/epoxy composites,” International Carbon Festival. 2014.11.
13 Seung A. Song, Seong Su Kim*, “Thermal and electrical characteristics of phenolic based carbon foam,” The 2014 Spring Conference of the Korean Society of Mechanical Engineers. 2014.04.
12 Hyun Ju Oh, Su Jin Ham, Song Hee Han, Seung Su Kim*, “Dispersion of Graphene using the electrostatic repulsion force in the graphene reinforced epoxy composites”, The 2014 Spring Conference of the Korean Society of Mechanical Engineers. 2014.04.
11 Song Hee han, Hyun Chul Lee, Seong Su Kim*, “A study on the high speed multi injection RTM systems for composites” The 2013 Fall Conference of the Korean Society of Mechanical Engineers. 2013.12.
10 Seung A.Song, Seong Su Kim*, “Study on the mechanical properties of the carbon nanoparticle reinforced phenolic foams fabricated by microwave,” The 2013 Fall Conference of the Korean Society of Mechanical Engineers. 2013.12.
09 Song Hee Han, Hyun Ju Oh, Seong Su Kim*, “Evaluation of the impregnation characteristics of carbon fiber-reinforced polypropylene composite using dissolved polypropylene”, The Fall Conference of the Korean Society for Composite Materials. 2013.11.
08 Seung Yoon On, Hyun Ju Oh, Seung Mi Yu, Sang-Kyun Hwang, Yong Sik Chung, Hui Yun Hwang, Seong Su Kim*, “Fabrication and evaluation for piezoelectric PVDF/PDMS composites by using wet squn PVDF fiber”, The Spring Conference of the Korean Society for Composite Materials. 2013.05.
07 Hyun Chul Lee, Hyun Ju Oh, Seong Su Kim*, “The Design of a Hybrid Composite Strut Tower for Improving Impact Resistance and Light-weight”, The 2012 Fall Conference of the Korean Society for Composite Materials. 2012.11.
06 Seung Mi Yu, Hyun Ju Oh, Sang-Kyun Hwang, Yong Sik Chung, Hui Yun Hwang, Seong Su Kim*, “Effect of post-treatments for wet spun PVDF on the piezoelectric property”, The 2012 Fall Conference of the Korean Society for Composite Materials. 2012.11.
05 Song Hee Han, Hyun Ju Oh, Seong Su Kim*, “Evaluation of the mechanical properties of the material of Carbon fiber / polypropylene composite according to carbon fiber surface treatment”, The 2012 Fall Conference of the Korean Society of Mechanical Engineers. 2012.11.
04 Seung A.Song, Hyun Chul Lee, Seong Su Kim*, “Manufacture and characteristic of phenolic foam reinforced activated carbon by using microwave”, The 2012 Fall Conference of the Korean Society of Mechanical Engineers. 2012.11.
03 Hyun Ju Oh, Hak Yong Kim, Seong Su Kim*, “The effect of the core-shell structured meta-aramid/epoxy nanofiber mats on interfacial bonding strength with an epoxy adhesive in cryogenic environments.”, The 2012 Fall Conference of the Korean Society of Mechanical Engineers 2012.11.
02 Hyun Ju Oh, Seong Su Kim*, “A novel preparative method for enhancing surface adhesion on meta-aramid nanofibers/epoxy adhesive composites by electrospinning”, The 2012 Spring Conference of the Korean Society for Composite Materials. 2012.05.
01 Seong Su Kim*, “Development of advanced cure cycle to reduce thermal residual stress”, The 2011 Spring Conference of the Korean Fiber Society. 2011.04.
International Patent
47 “Composite spring capable of self-triboelectric energy harvesting,” US Patent Registered No.11.695.351 2023.
46 “Core-shell structured fiber type strain sensor and method of manufacturing the same” China Patent Pending No. ZL202080000920.7 2023.
45 “Core-shell structured fiber type strain sensor and method of manufacturing the same”, US Patent Registered No. 11,280,688 2022.
44 “Sensor-integrated foam core sandwich composite spring capable of measuring bending deformation”, US Patent Pending No. 17562667 2021.
43 “Electrodes for Vanadium Redox Flow Battery and Method for Manufacturing same”, US Patent Pending No. 17503552
42 “Core-shell structured fiber type strain sensor and method of manufacturing the same” US Patent Pending No. 16/755,538 2020.
41 “Core-shell structured fiber type strain sensor and method of manufacturing the same”, Patent Pending No. PCT/KR2020/003915 2020.
40 “Manufacturing method for carbon fiber grown metal oxide” US Patent Pending No. 15/249,211 2016.
39 “Reinforcement member for membrane of liquefied natural gas cargo, membrane assembly having same, and construction method for same” Japan Patent Registered No. 05519535 2014.
38 “Separation plate for fuel cell and method of manufacturing the same” Japan Patent Registered No. 05368738 2013.
37 “Separation board for fuel battery stack and its manufacturing method” Japan Patent Registered No. 05368828 2013.
36 “Method for preparing high strength electrospun nanofiber by microwave treatment and nanofiber thereof”, Patent Pending No. PCT/KR2013/011635 2013.
35 “A method of preparing and processing sizing agent comprising thermoplastic resin”, Patent Pending No. PCT/KR2013/011640 2013.
34 “Particle reinforced cellular foam and preparation method thereof” Patent Pending No. PCT/KR2013/002555 2013.
33 “Fixing device for cargo hold insulation panel and insulation panel using the fixing device”, Japan Patent Registered No. 05166603 2012.
32 “Apparatus for fixing an insulation panel of a cargo and insulation panel therof”, USA Patent Pending No. 13456003 2012.
31 “Hybrid composite journal bearing and manufacturing method thereof”, USA Patent Registered No. 08028416 2011.
30 “Fuel cell separator and method for manufacturing same” USA Patent Registered No. 07867656 2011.
29 “Probe card and its manufacturing method” Japan Patent Registered No. 04825892 2011.
28 “Probe card and its manufacturing method” Japan Patent Registered No. 04554496 2010.
27 “Apparatus for fixing an insulation panel of a cargo and insulation panel therof”, USA Patent Pending No. 12917275 2010.
26 “Hybrid composite journal bearing and manufacturing method thereof”, USA Patent Pending No. 12781570 2010.
25 “Hybrid composite journal bearing and manufacturing method thereof”, USA Patent Registered No. 2010/07757403 2010.
24 “Hybrid composite journal bearing and manufacturing method thereof”, Japan Patent Registered No. 04247274 2009.
23 “Brennstoffzellenseparator und Verfahren zum Herstellen desselben” German Patent Registered No. 102008041320 2009.
22 “Fuel cell separator and method for manufacturing same” China Patent Registered No. 101567433 2009.
21 “Fixing device for cargo hold insulation panel and insulation panel using the fixing device”, China Patent Pending No. 200980116565 2009.
20 “Fixing device for cargo hold insulation panel and insulation panel using the fixing device”, EU Patent Pending No. EP20090739005 2009.
19 “Fixing device for cargo hold insulation panel and insulation panel using the fixing device”, Japan Patent Pending No. 23507356 2009.
18 “Orthotropic elastic metal membrane”, China Patent Pending No. 200980114718 2009.
17 “Orthotropic elastic metal membrane”, EU Patent Pending No. 09734527.6 2009.
16 “Reinforcement member for membrane of liquefied natural gas cargo, membrane assembly having same, and construction method for same”, China Patent Pending No. 200980108028 2009.
15 “Reinforcement member for membrane of liquefied natural gas cargo, membrane assembly having same, and construction method for same”, EU Patent Pending No. EP20090718329 2009.
14 “Separation plate for fuel cell and method of manufacturing the same” China Patent Pending No. 200910117832 2009.
13 “Separation plate for fuel cell and method of manufacturing the same” German Patent Pending No. 102009001185 2009.
12 “Separation plate for fuel cell and method of manufacturing the same” USA Patent Pending No. 12394337 2009.
11 “Hybrid composite journal bearing and manufacturing method thereof”, China Patent Registered No. 100412397 2008.
10 “End plates for fuel cell stack and method of manufacturing the same” USA Patent Pending No. 12/006,159 2008.
09 “End plates for fuel cell stack and method of manufacturing the same” Japan Patent Pending No. 2007-323886 2008.
08 “Probe card and its manufacturing method” USA Patent Registered No. 07319317 2008.
07 “Fuel cell separator and method for manufacturing the same” Japan Patent Pending No. 20172938 2008.
06 “Fuel cell stack assembly” Japan Patent Pending No. 2008-161645 2008.
05 “Fuel cell stack assembly” German Patent Pending No. 102008040503.5 2008.
04 “Fuel cell stack assembly” China Patent Pending No. 200810148883.5 2008.
03 “Fuel cell stack assembly” USA Patent Pending No. 12/218,113 2008.
02 “Manufacturing method of a hybrid composite journal bearing” EU Patent Registered No. 01629213 2007.
01 “Probe card and its manufacturing method” USA Patent Registered No. 07248064 2007.
Domestic Patent
71 “Battery module and battery pack including the same”, Korean Patent Pending No.10-0006914 2024.
70 “Composite material capable of measuring bending deformation, spring including the same, and manufacturing method thereof” Korea Patent Registered No.10-2624982 2024.
69 “Separator-electrode integrated structure for vanadium redox flow battery and manufacturing method thereof” Korea Patent Registered No. 10-0008420 2023.
68 “Carbon-based Paper Electrode with Micro Channel for Redox Flow Battery, and Method of Manufacturing the Same” Korea Patent Registered No.10-2524222 2023.
67 “Plastic resin composite comprising silane and pretreating method of the same” Korea Patent Registered No.10-2617911 2023.
66 “Air nozzle for providing uniform air flow in inner space of a vehicle”, Korea Patent Registered No.10-2615058 2023.
65 “Apparatus for preventing airborne congestion by using sweeping flow and vehicle equipped with the apparatus”, Korea Patent Registered No. 10-2613973 2023.
64 “Active multi-scale sound absorber and fabrication method thereof”, Korea Patent Registered No. 10-2612637 2023.
63 “Plastic resin composite comprising metal oxide nanorod and pretreating method of the same”, Korea Patent Registered No.10-2549188 2023.
62 “Vibration isolator with bandgap structure and method of manufacturing vibration isolator”, Korea Patent Registered No.10-2497329 2023.
61 “Electrode for vanadium redox flow battery and manufacturing method for the same”, Korea Patent Registered No.10-0136963 2023.
60 “Anti-wrinkle apparatus of flexible display”, Korea Patent Registered No. 10-2422537 2022.
59 “Porous electrodes for vanadium redox flow battery with gradient in compressive stiffness and manufacturing thereof”, Korea Patent Pending No. 10-0089186 2022.
58 “Anti-vibration structure and manufacturing method thereof”, Korea Patent Pending No. 10-0167874 2022.
57 “Closed-cell thermoelectric foam”, Korea Patent Pending No. 10-0029665 2022.
56 “Method of manufacturing fiber type strain sensor and fiber type strain sensor having reinforced creep resistance manufactured by using the same”, Korea Patent Registered No. 10-2457686 2022.
55 “Closed-cell thermoelectric foam”, Korea Patent Pending No. 10-0029665 2022.
54 “Sound absorbing structure that can harvest energy and method of manufacturing the same”, Korea Patent Pending No. 10-0139402 2021.
53 “Sandwich structure smpc bending actuator”, Korea Patent Pending No. 10-0111482 2021.
52 “Core-shell structured fiber type strain sensor and method of manufacturing the same”, Korea Patent Registered No. 10-2297044 2021.
51 “Composite spring capable of self-triboelectric energy harvesting”, Korea Patent Pending No. 10-0095712 2021.
50 “Bipolar plate-electrode integrated structure for vanadium redox flow battery and manufacturing method thereof”, Korea Patent Pending No. 10-0089041 2021.
49 “Carbon electrode structure for a vanadium redox flow battery with a pseudo-channel effect and manufacturing thereof”, Korea Patent Pending No. 10-0002760 2021.
48 “Electrode for vanadium redox flow battery and manufacturing method for the same”, Korea Patent Pending No.10-0136963 2021.
47 “Secondary battery having a honeycomb sandwich structure for supporting load”, Korea Patent Registered No. 10-2161836 2020.
46 “Structure of carbon nano tube with micro channel for redox flow battery, and method of manufacturing the same”, Korea Patent Pending No. 10-0002707 2020.
45 “Segment type ring burst test apparatus for mechanical properties evaluation of composite pressure vessels and its design method”, Korea Patent Pending No. 10-0170514 2019.
44 “Ocean water curtain fountain apparatus for reducing dust particles”, Korea Patent Pending No. 10-0034138 2019.
43 “Fiber sensor having a multi-shell structure for load bearing capacity, linearity and noise level”, Korea Patent Pending No. 10-0130104 2019.
42 “Carbon fiber reinforced thermoplastics and method for preparing the same”, Korea Patent Registered No. 10-1868679 2018.
41 “Manufacturing method for carbon fiber grown metal oxide”, Korea Patent Registered No. 10-1812698 2017.
40 “End plates for fuel cell stack”, Korea Patent Registered No. 10-1481173 2015.
39 “Polymer fiber stitched composite material for sliding bearings and manufacturing methods thereof”, Korea Patent Pending No. 10-0151309 2015.
38 “Method for preparing high strength electrospun nanofiber by microwave treatment and the nanofiber thereof”, Korea Patent Registered No. 10-1524804 2015.
37 “A method of preparing and processing sizing agent comprising thermoplastic resin”, Korea Patent Registered No. 10-1485692 2015.
36 “Method for producing piezoelectric properties enhanced poly(vinylidene fluoride) piezoelectric fiber using wet spinning”, Korea Patent Registered No. 10-1429542 2014.
35 “Particle reinforced cellular foam and manufacturing method thereof”, Korea Patent Registered No. 10-1442204 2014.
34 “Bipolar plate for fuel cell stacks”, Korea Patent Registered No. 10-1417107 2014.
33 “Method for preparing high strength electrospun nanofiber by microwave treatment and nanofiber thereof”, Korea Patent Pending No. 10-0118416 2013
32 “Separation plate for Polymer Electrolyte Membrane Fuel Cell and method for manufacturing the same”, Korea Patent Registered No.10-1090704 2011.
31 “Deck for mobile harbor”, Korea Patent Registered No. 10-1027106 2011.
30 “Insulation panel and lng storage tank having the same, method for construction of the insulation panel”, Korea Patent Registered No.1011742 2011.
29 “Plugging method of flexible insulation material”, Korea Patent Registered No. 1024552 2011.
28 “Fuel cell separator and method for manufacturing the same”, Korea Patent Registered No. 1090704 2011.
27 “The inner hull joining method of lng storage tank”, Korea Patent Registered No.1031265 2011.
26 “End plate for fuel cell stack”, Korea Patent Registered No. 10-0993669 2010.
25 “End plates for fuel cell stack and method of manufacturing the same”, Korea Patent Registered No. 0980927 2010.
24 “End plates for fuel cell stack”, Korea Patent Registered 0993669 2010.
23 “Corner panel structures of lng containment system and manufacturing method thereof”, Korea Patent Registered No. 0972653 2010.
22 “Fixing member positioning device and construction device for lng containment tank and method for construction using the same”, Korea Patent Registered No. 0950249 2010.
21 “Composite end plate for fuel cells with curvature”, Korea Patent Registered No. 10-0964531 2010.
20 “Construction method of metal plate of lng ships for reducing thermal stress”, Korea Patent Registered No. 0955419 2010.
19 “The composite case for battery shield and manufacturing method thereof”, Korea Patent Registered No.0978142 2010.
18 “Cargo containment system of lng ship and construction method thereof”, Korea Patent Registered No. 0924099 2009.
17 “Carbon composite fuel cell bipolar plate and method making for it”, Korea Patent Registered No. 0901362 2009.
16 “End plates for fuel cell stack”, Korea Patent Pending No. 2008-0111877 2008.
15 “Structure and method for connecting insulation protective wall of liquefied natural gas tank ship”, Korea Patent Registered No. 0760482 2007.
14 “Wire-cutting device for aircraft”, Korea Patent Registered No. 0715432 2007.
13 “Probe card and method manufacturing the same”, Korea Patent Registered No. 0711292 2007.
12 “Water lubricated hybrid composite journal bearing and manufacturing the same”, Korea Patent Registered No. 0707977 2007.
11 “Hybrid composite journal bearing and method formanufacturing it”, Korea Patent Registered No. 10-0612615 2006.
10 “Bearing assembly and method manufacturing the same”, Korea Patent Registered No. 0619473 2006.
09 “Nano-cellular phenolic foam and producing method the same”, Korea Patent Registered No. 0612618 2006.
08 “Hybrid propeller shaft which is composed of metal and composite material and fabrication method thereof”, Korea Patent Registered No. 0600478 2006.
07 “Composite journal bearing in which concave surface is formed and fabrication method thereof”, Korea Patent Registered No. 0597073 2005.
06 “Nano-cellular phenolic foam and producing method the same”, Korea Patent Registered No. 0595822 2005.
05 “Hybrid shaft composed of metal and composite material for cleaning lcd panel and fabrication method thereof”, Korea Patent Registered No. 0578535 2005.
04 “Hybrid valve lifter made of metal and composite material”, Korea Patent Registered No. 0567187 2005.
03 “Hybrid composite track pin”, Korea Patent Registered No. 0567185 2005.
02 “Composite shell journal bearing and manufacturing method thereof”, Korea Patent Registered No. 0560083 2005.
01 “Impact beam for passenger car door”, Korea Patent Registered No. 0519053 2005.