1. Da Hye Kim, Hui Yun Hwang, Seong Su Kim, “Fabrication of PVDF film sensors for fatigue damage monitoring of single-lap adhesive joints”. Composite Structures, 2019;207: 223-231
  2. Seung Yoon On, Yun Seong Kim, Jun Il You, Jun Woo Lim, Seong Su Kim, “Dynamic characteristics of composite tilting pad journal bearing for turbine/generator applications”. Composite Structures, 2018;201: 747–759
  3. Ibrahim M.A.Mohamed, Ahmed S.Yasin,Nasser A.M.Barakat,Seung A.Song, Ha EunLee, Seong SuKim, “Electrocatalytic behavior of a nanocomposite of Ni/Pd supported by carbonized PVA nanofibers towards formic acid, ethanol and urea oxidation: A physicochemical and electro-analysis study”. Applied Surface Science, 2018;435: 122-129
  4. Kun Jeong, Da Hye Kim, Yong Sik Chung, Sang Kyun Hwang, Hui Yun Hwang, Seong Su Kim, “Effect of processing parameters of the continuous wet spinning system on the crystal phase of PVDF fibers”, Journal of Applied Polymer science, 2018;134, 45712
  5. Ha Eun Lee, Yong Sik Chung, Seong Su Kim, “Feasibility study on carbon-felt-reinforced thermoplastic composite materials for PEMFC bipolar plates”, Composite Structures (JCR TOP 10%), 2017;180:378-385
  6. Seung A Song, Youngmin Lee, Yeon Su Kim, Seong Su Kim, “Mechanical and thermal properties of carbon foam derived fromphenolic foam reinforced with composite particles”, Composite Structures (JCR TOP 10%), 2017;173:1-8.
  7. Seung Yoon On, Moo Sun Kim, Seong Su Kim, “Effects of post-treatment of meta-aramid nanofiber mats on the adhesion strength of epoxy adhesive joints”, Composite Structures (JCR TOP 10%), 2017;159:636-645.
  8. Seung A Song, Choong Kwang Lee, Yun Hyuk Bang, Seong Su Kim, “A novel coating method using zinc oxide nanorods to improve the interfacial shear strength between carbon fiber and a thermoplastic matrix”, Composites Science and Technology (JCR TOP 5%), 2016;134:106-114.
  9. Kang Yeong Choe, Seung Yoon On, Seung A. Song, Jun Woo Lim, Jun Il You, Seong Su Kim, “Study of the endurance performance of composite journal bearings under the oil cut situation”, Composite Structures (JCR TOP 10%), 2015;134:772-781.
  10. Seung Jin See, Song Hee Han, Kwang Un Jeong, Il Joon Bae, Ik Pyo Hong, Su Kang Choi, Seong Su Kim, “Effect of crystal morphology transition of polypropylene on interfacial properties of carbon fiber-reinforced composites through AlOOH surface treatment”, Composites Part A : applied science and manufacturing (JCR TOP 10%), 2015;78:362-370.
  11. Ha Eun Lee, Song Hee Han, Seung A Song, Seong Su Kim, “Novel fabrication process for carbon fiber composite bipolar plates using sol gel and the double percolation effect for PEMFC”, Composite Structures (JCR TOP 10%), 2015;134:44-51.
  12. Song Hee Han, Eun Jeong Cho, Hyun Chul Lee, Seong Su Kim*, Study on high-speed RTM to reduce the impregnation time of carbon/epoxy composites, Composite Structures (JCR TOP 10%), 2015;119:50-58.
  13. Oh Min Kwon, Seung Jin See, Seong Su Kim, Hui Yun Hwang, Effects of surface treatment with coupling agents of PVDF-HFP fibers on the improvement of the adhesion characteristics on PDMS, Applied Surface Science, 2014;321:378-386.
  14. Seung A. Song, Yong Sik Chung, Seong Su Kim*, The mechanical and thermal characteristics of phenolic foams reinforced with carbon nanoparticles, Composites Science and Technology (JCR TOP 5%), 2014;103:85-93.
  15. Yun Hwangbo, Choong-Kwang Lee, Alexander E Mag-Isa, Jae-Won Jang, Hak-Joo Lee, Soon-Bok Lee, Seong Su Kim, Jae-Hyun Kim, Interlayer non-coupled optical properties for determining the number of layers in arbitrarily stacked multilayer graphenes, Carbon (JCR TOP 10%), 2014;77:454-461.
  16. Hyun Ju Oh, Hak Yong Kim, Seong Su Kim*, Effect of the core/shell structured meta-aramid/epoxy nanofiber on the mechanical and thermal properties in epoxy adhesive composites by Electrospinning, The Journal of Adhesion, 2014;90:787-801.
  17. Hyun Ju Oh, Song Hee Han, Seong Su Kim*, A novel method for a high-strength electrospun meta-aramid nanofiber by microwave treatment, Journal of Polymer Science Part B: Polymer Physics, 2014;52:807-814. (Cover page)
  18. Choong-Kwang Lee, Yun Hwangbo, Sang-Min Kim, Seoung-Ki Lee, Seung-Mo Lee, Seong-Su Kim, Kwang-Seop Kim, Hak-Joo Lee, Byung-Ik Choi, Chang-Kyu Song, Jong-Hyun Ahn, Jae-Hyun Kim, Monoatomic Chemical-Vapor-Deposited Graphene Membranes Bridge a Half Millimeter-Scale Gap, ACS Nano (JCR TOP 5%), 2014;8:2336-2344.
  19. Hyun Ju Oh, Song Hee Han, Hak Yong Kim, Seong Su Kim*, The influence of the core–shell structured meta-aramid/epoxy nanofiber mats on interfacial bonding strength and the mechanical properties of epoxy adhesives at cryogenic environment, Journal of Adhesion Science and Technology, 2014;28:950-962.
  20. Hyun Chul Lee, Yong Sik Jung, Hyun Ju Oh, Seong Su Kim*, Design of a hybrid composite strut tower for use in automobiles, Advanced Composite Materials, 2014;23:275-291.
  21. Song Hee Han, Hyun Ju Oh, Seong Su Kim*, Evaluation of the impregnation characteristics of carbon fiber-reinforced composites using dissolved polypropylene, Composites Science and Technology (JCR TOP 5%), 2014;91: 55-62.
  22. Yun Hwangbo, Choong-Kwang Lee, Sang-Min Kim, Jae-Hyun Kim, Kwang-Seop Kim, Bongkyun Jang, Hak-Joo Lee, Seoung-Ki Lee, Seong-Su Kim, Jong-Hyun Ahn, Seung-Mo Lee, Fracture Characteristics of Monolayer CVD-Graphene, Scientific Reports (JCR TOP 10%), 2014;4:4439-4447.
  23. Song Hee Han, Hyun Ju Oh, Seong Su Kim*, Evaluation of fiber surface treatment on the interfacial behavior of carbon fiber-reinforced polypropylene composites, Composites Part B (JCR TOP 10%), 2014;60;98-105.
  24. Seung A Song, Hyun Ju Oh, Bu Ki Kim, Seong Su Kim*, Novel foaming methods to fabricate activated carbon reinforced microcellular phenolic foams, Composites Science and Technology (JCR TOP 5%), 2013;76:45-51.
  25. Song Hee Han, Hyun Chul Lee, Yong Sik Jung, Seong Su Kim*, The effect of post-processing of carbon fibers on the mechanical properties of epoxy-based composites, Composite Part B (JCR TOP 10%), 2013;45:172-177.
  26. Seong Su Kim*, Hideaki Murayama, Kazuro Kageyama, Kiyoshi Uzawa, Makoto Kanai, Study on the curing process for carbon/epoxy composites to reduce thermal residual stress, Composites Part A (JCR TOP 10%), 2012;43:1197-1202.
  27. Seong Su Kim*, Ha Na Yu, Dai Gil Lee, Hideaki Murayama, Kazuro Kageyama, Tribological behaviors of plsma-treated carbon composite grooved surfaces, Composite Structures (JCR TOP 10%), 2010;92:1039-1046.
  28. Ha Na Yu, Seong Su Kim, Jung Do Suh, Dai Gil Lee*, Axiomatic design of the sandwich composite end plate for PEMFC fuel cell vehicles, Composite Structures (JCR TOP 10%), 2010;92:1504-1511.
  29. Ha Na Yu, Seong Su Kim, Jung Do Suh, Dai Gil Lee*, Composite endplates with pre-curvature for PEMFC (Polymer Electrolyte Membrane Fuel Cell), Composite Structures (JCR TOP 10%), 2010;92:1498-1503.
  30. In Uk Hwang, Ha Na Yu, Seong Su Kim, Dai Gil Lee*, Integrated Carbon Composite Bipolar Plate for Polymer Electrolyte Membrane Fuel Cells, Journal of Power Sources (JCR TOP 10%), 2009;189:929-934.
  31. Seong Su Kim, Ha Na Yu, In Uk Hwang, Dai Gil Lee*, Seong Nam Kim, Kazuyoshi Suzuki, Hiroyuki Sada, The sliding Friction of Hybrid Composite Journal Bearing under Various Test Conditions, Tribology Letters, 2009;35:211-219.
  32. Seong Su Kim, Ha Na Yu, In Uk Hwang, Dai Gil Lee*, Development of the Carbon/phenolic Composite Shoulder Bearing, Composite Structures (JCR TOP 10%), 2009;88:26-32.
  33. Ha Na Yu, Seong Su Kim, Dai Gil Lee*, Optimum design of aramid-phenolic/glass-phenolic composite journal bearing, Composites Part A (JCR TOP 10%), 2009;40:1186-1191.
  34. In Uk Hwang, Ha Na Yu, Seong Su Kim, Dai Gil Lee*, Jung Do Suh, Bipolar plate made of carbon fiber epoxy composite for polymer electrolyte membrane fuel cells, Journal of Power sources (JCR TOP 10%), 2008;184:90-94.
  35. Seong Su Kim, Ha Na Yu, In Uk Hwang, Dai Gil Lee*, Characteristics of Wood-polymer Composite for Journal Bearing Materials, Composite Structures (JCR TOP 10%), 2008;86:279-284.
  36. Ha Na Yu, In Uk Hwang, Seong Su Kim, Dai Gil Lee*, Application of natural fiber reinforced composites to trenchless rehabilitation of underground pipes, Composite Structures (JCR TOP 10%), 2008;86: 285-290.
  37. Seong Su Kim, Ha Na Yu, Dai Gil Lee*, Adhesive Joining of Marine Composite Journal Bearings to Backing Metals, Composite Science and Technology (JCR TOP 5%), 2007;67:3417-3424.
  38. Seong Su Kim, Hak Gu Lee, Dai Gil Lee*, Tribological Behaviors of Polymer Coated Carbon Composites under Dry and Water-lubricating Conditions, Composite Structures (JCR TOP 10%), 2007;77: 364-372.
  39. Seong Su Kim, Dai Gil Lee*, Design of the Hybrid Composite Journal Bearing Assembled by Interference Fit, Composite Structures (JCR TOP 10%), 2006;75:222-230.
  40. Hak Gu Lee, Seong Su Kim, Dai Gil Lee*, Effect of compacted wear debris on the tribological behavior of carbon/epoxy composites, Composite Structures (JCR TOP 10%), 2006;74:136-144.
  41. Dong Chang Park, Seong Su Kim, Byung Chul Kim, Seung Min Lee, Dai Gil Lee*, Wear Characteristics of Carbon-Phenolic Woven Composites Mixed with Nano Particles, Composite Structures (JCR TOP 10%), 2006;74:89-98
  42. Seong Su Kim, Hak Gu Lee, Dai Gil Lee*, Tribological Behaviors of Carbon Composite Grooved Surfaces, Composite Structures (JCR TOP 10%), 2005;71:238-245.
  43. Seong Su Kim, Dong Chang Park, Dai Gil Lee*, Characteristics of Carbon Fiber Phenolic Composite for Journal Bearing Materials, Composite Structures (JCR TOP 10%), 2004;66:359-366.
  44. Dai Gil Lee*, Seong Su Kim, Failure Analysis of Asbestos-Phenolic Composite Journal Bearing, Composite Structures (JCR TOP 10%), 2004;65:37-46.
  1. Seung A Song, Seung Yoon On, Go Eun Park, Seong Su Kim*, “Improvement of Physical Properties for Carbon Fiber/PA 6,6 Composites”, Composites Research, 2017;30:365-370
  2. Song Hee Han, Hyun Ju Oh, Seong Su Kim*, “Evaluation of Mechanical Property of Carbon Fiber/Polypropylene Composite According to Carbon Fiber Surface Treatment”, The Conference of the Korean Society of Mechanical Engineers, 2013;37:791-796 
  3. Hyun Ju Oh, Seong Su Kim*, “The Effect of the Core-shell Structured Meta-aramid/Epoxy Nanofiber Mats on Interfacial Bonding Strength with an Epoxy Adhesive in Cryogenic Environments”, Composites Research, 2013;26:129-134 
  1. “PARTICLE REINFORCED CELLULAR FOAM AND MANUFACTURING METHOD THEREOF” US Patent Pending No. 14/441,189, 2015.
  2. “Method for preparing high strength electrospun nanofiber by microwave treatment and nanofiber thereof”, Patent Pending No. PCT/KR2013/011635
  3. “A method of preparing and processing sizing agent comprising thermoplastic resin”, Patent Pending No. PCT/KR2013/011640
  4. “Particle reinforced cellular foam and preparation method thereof” Patent Pending No. PCT/KR2013/002555
  5. “Apparatus for fixing an insulation panel of a cargo and insulation panel therof”, USA Patent Pending No. 13456003, 2012
  6. “Apparatus for fixing an insulation panel of a cargo and insulation panel therof”, USA Patent Pending No. 12917275, 2010
  7. “Hybrid composite journal bearing and manufacturing method thereof”, USA Patent Pending No. 12781570, 2010
  8. “Hybrid composite journal bearing and manufacturing method thereof”, USA Patent Registered No. 2010/07757403, 2010
  9. “Fixing device for cargo hold insulation panel and insulation panel using the fixing device”, China Patent Pending No. 200980116565, 2009
  10. “Fixing device for cargo hold insulation panel and insulation panel using the fixing device”, EU Patent Pending No. EP20090739005, 2009
  11. “Fixing device for cargo hold insulation panel and insulation panel using the fixing device”, Japan Patent Pending No. 23507356, 2009
  12. “Orthotropic elastic metal membrane”, China Patent Pending No. 200980114718, 2009
  13. “Orthotropic elastic metal membrane”, EU Patent Pending No. 09734527.6, 2009
  14. “Reinforcement member for membrane of liquefied natural gas cargo, membrane assembly having same, and construction method for same”, China Patent Pending No. 200980108028, 2009
  15. “Reinforcement member for membrane of liquefied natural gas cargo, membrane assembly having same, and construction method for same”, EU Patent Pending No. EP20090718329, 2009
  16. “Reinforcement member for membrane of liquefied natural gas cargo, membrane assembly having same, and construction method for same” Japan Patent Pending No. 22546708, 2009
  17. “Probe Card and Method Manufacturing the Same” Japan Patent Pending No. 2009-092334, 2009
  18. “Separation plate for fuel cell and method of manufacturing the same” China Patent Pending No. 200910117832, 2009
  19. “Separation plate for fuel cell and method of manufacturing the same” Japan Patent Pending No. 21044841, 2009
  20. “Separation plate for fuel cell and method of manufacturing the same” German Patent Pending No. 102009001185, 2009
  21. “Separation plate for fuel cell and method of manufacturing the same” USA Patent Pending No. 12394337, 2009
  22. “End plates for fuel cell stack and method of manufacturing the same” USA Patent Pending No. 12/006,159, 2008
  23. “End plates for fuel cell stack and method of manufacturing the same” Japan Patent Pending No. 2007-323886, 2008
  24. “Probe Card and Method Manufacturing the Same” USA Patent Pending No. 7,319,317 B2, 2008
  25. “Fuel cell separator and method for manufacturing the same” USA Patent Pending No. 12229183, 2008
  26. “Fuel cell separator and method for manufacturing the same” China Patent Pending No. 200810169548, 2008
  27. “Fuel cell separator and method for manufacturing the same” German Patent Pending No. 102008041320, 2008
  28. “Fuel cell separator and method for manufacturing the same” Japan Patent Pending No. 20172938, 2008
  29. “Fuel cell stack assembly” Japan Patent Pending No. 2008-161645, 2008
  30. “Fuel cell stack assembly” German Patent Pending No. 102008040503.5, 2008
  31. “Fuel cell stack assembly” China Patent Pending No. 200810148883.5, 2008
  32. “Fuel cell stack assembly” USA Patent Pending No. 12/218,113, 2008
  1. Seung A Song, Go Eun Park, Seong Su Kim, “Carbon fiber reinforced thermoplastics and method for preparing the same”, Korea Patent Registered No.10-1868679, 2018.
  2. Seung A Song, Su Jin Ham, Da Hye Kim, Ha Eun Lee, Seong Su Kim, “Manufacturing method for carbon fiber grown metal oxide”, Korea Patent Registered No. 10-1812698, 2017.
  3. Seung A Song, Kang Yeong Choe, Seong Su Kim, “Polymer fiber stitched composite material for sliding bearings and manufactureing methods thereof”, Korea Patent Pending No. 10-2015-0151309, 2015.
  4. “Method for Preparing High Strength Electrospun Nanofiber by Microwave Treatment and the Nanofiber thereof”, Korea Patent Registered No. 1524804, 2015.
  5. “Method for producing piezoelectric properties enhanced Poly(Vinylidene Fluoride) piezoelectric fiber using wet spinning”, Korea Patent Registered No. 1429542, 2014.
  6. “Particle reinforced cellular foam and manufacturing method thereof”, Korea Patent Registered No. 1442204, 2014.
  7. “Bipolarplate for Fuel Cell Stacks”, Korea Patent Registered No. 1417107, 2014.
  8. “Method for preparing high strength electrospun nanofiber by microwave treatment and nanofiber thereof”, Korea Patent Pending No. 2013-0118416, 2013
  9. “A method of preparing and processing sizing agent comprising thermoplastic resin”, Korea Patent Pending No. 2013-0095761, 2013.
  10. “Deck for mobile harbor”, Korea Patent Registered No. 1027106, 2011.
  11. “Insulation panel and LNG storage tank having the same, method for construction of the insulation panel”, Korea Patent Registered No.1011742, 2011.
  12. “Plugging Method of Flexible Insulation Material”, Korea Patent Registered No. 1024552, 2011.
  13. “Fuel cell separator and method for manufacturing the same”, Korea Patent Registered No. 1090704, 2011.
  14. “The Inner Hull Joining Method of LNG Storage Tank”, Korea Patent Registered No.1031265, 2011.
  15. “End plates for fuel cell stack and method of manufacturing the same”, Korea Patent Registered No. 0980927, 2010.
  16. “End plates for fuel cell stack”, Korea Patent Registered 0993669, 2010.
  17. “Corner Panel Structures of LNG Containment System and Manufacturing Method Thereof”, Korea Patent Registered No. 0972653, 2010.
  18. “Construction Method of Hull Joints for LNG Ships using Template”, Korea Patent Registered No. 0950249, 2010.
  19. “Composite End Plate for Fuel Cells with Curvature”, Korea Patent Pending No. 0964531, 2010.
  20. “Construction Method of Metal Plate of LNG Ships for Reducing Thermal Stress”, Korea Patent Registered No. 0955419, 2010.
  21. “The Composite Case for Battery Shield and Manufacturing Method Thereof”, Korea Patent Registered No.0978142, 2010.
  22. “LNG Containment Structure Without Thermal Stress for LNG Ships”, Korea Patent Registered No. 0924099, 2009.
  23. “Carbon Composite Fuel Cell Bipolar Plate and Method Making for It”, Korea Patent Registered No. 0901362, 2009.
  24. “End plates for fuel cell stack”, Korea Patent Pending No. 2008-0111877, 2008.
  25. “End plates for fuel cell stack”, Korea Patent Pending No. 2008-0089541, 2008.
  26. “Structure and Method for Connecting Insulation Protective Wall of Liquefied Natural Gas Tank Ship”, Korea Patent Registered No. 0760482, 2007.
  27. “Wire-Cutting Device for Aircraft”, Korea Patent Registered No. 0715432, 2007.
  28. “Probe Card and Method Manufacturing the Same”, Korea Patent Registered No. 0711292, 2007.
  29. “Water Lubricated Hybrid Composite Journal Bearing and Manufacturing the Same”, Korea Patent Registered No. 0707977, 2007.
  30. “Bearing Assembly and Method manufacturing the Same”, Korea Patent Registered No. 0619473, 2006.
  31. “Nano-Cellular Phenolic Foam and Producing Method the Same”, Korea Patent Registered No. 0612618, 2006
  32. “Hybrid Propeller Shaft Which is Composed of Metal and Composite Material and Fabrication Method Thereof”, Korea Patent Registered No. 0600478, 2006.
  33. “Composite Journal Bearing in Which Concave Surface is Formed and Fabrication Method Thereof”, Korea Patent Registered No. 0597073, 2005.
  34. “Nano-Cellular Phenolic Foam and Producing Method the Same”, Korea Patent Registered No. 0595822, 2005.
  35. “Hybrid Shaft Composed of Metal and Composite Material for Cleaning LCD Panel and Fabrication method Thereof”, Korea Patent Registered No. 0578535, 2005.
  36. “Hybrid Valve Lifter Made of Metal and Composite Material”, Korea Patent Registered No. 0567187, 2005.
  37. “Hybrid Composite Track Pin”, Korea Patent Registered No. 0567185, 2005.
  38. “Composite Shell Journal Bearing and Manufacturing Method Thereof”, Korea Patent Registered No. 0560083, 2005.
  39. “Impact Beam for Passenger Car Door”, Korea Patent Registered No. 0519053, 2005.
  1. Kwang Il Jeong, Seung-A Song and Seong Su Kim, “Effect of glucose coating layer on surface modification of carbon felt electrodes for vanadium redox flow batteries”, 3rd International Workshop on Active Materials and Soft Mechatronics – AMSM2018, Daejeon, Korea, 2018.10.
  2. Hyunsoo Hong and Seong Su Kim, “Study on the conformation of crystalline structure in PVDF/PVA composite film”, 3rd International Workshop on Active Materials and Soft Mechatronics – AMSM2018, Daejeon, Korea, 2018.10.
  3. Kwang Il Jeong and Seong Su Kim*, “Study on the carbon felt electrodes with conductive coating for vanadium redox flow batteries”,  21th International Conference on Composite Structures – ICCS21, Bolonga, Italy, 2018.09.
  4. Hyunsoo Hong, Seung-A Song and Seong Su Kim*, “Effect of electrospun PVA nanofiber mats on the transformation of crystalline structures of PVDF film”,  21th International Conference on Composite Structures – ICCS21, Bolonga, Italy, 2018.09.
  5. Seung A Song and Seong Su Kim*, “Fabrication of carbon foam derived from carbonization of phenolic foam with open cell”,  21th International Conference on Composite Structures – ICCS21, Bolonga, Italy, 2018.09.
  6. Su-Hyun Lim, Seung Yoon On and Seong Su Kim*, “Effect of sizing of carbon fibers on flow characteristics of epoxy resins”, Emerging Technologies in Mechanical Engineering 2018 – ETME2018, Jeju, Korea, 2018. 08.
  7. Seung A Song and Seong Su Kim*, “Growth of zinc oxide nanorodes with respect to surface condition of carbon fiber and post annealing” Asian textile conference-13, Victoria, Australia, 2015. 11.
  8. Seung Yoon On, and Seong Su Kim, “Failure analysis of the meta-aramid/epoxy nanofiber mats reinforced epoxy adhesive joint in cryogenic environments”, International conference on advances in mechanics of composite materials and structures (Composite seoul 2015), Seoul, Korea, 2015. 10.
  9. Seung A Song and Seong Su Kim, “Mechanical and thermal characteristics of the carbon fiams derived from phenolic resin mixed with polyacrylonitrile (PAN),” Advances in mechanics of composite materials and structures, Seoul, Korea, 2015. 10.
  10. Kang Yeong Choe, Seong Su Kim*, “Study of the durability of composite tilting pad journal bearing for turbo compressor system under the oil-cut situation”, International Conference on Advances in Mechanics of Composite Materials and Structures (CompositesSeoul 2015), Seoul, Korea, 2015. 10.
  11. Seung Yoon On, Seung A Song, Daichi Wada, Murayama Hideaki, Seong Su Kim*, “The influence of the meta-aramid nanofiber mats on the adhesion strength”. 20th International Conference on Composite Materials (ICCM20), Denmark, 2015. 07
  12. Ha Eun Lee, Song Hee Han, Seong Su Kim, “Development of carbon fiber reinforced thermoplastic composite bipolar plates for polymer electrolyte membrane fuel cell”. 18th International Conference on Composite Structures (ICCS18), Portugal, 2015. 06
  13. Kang Yeong Choe, Seung Yoon On, Jun Il You, Seong Su Kim, “Development of the composite journal bearing for turbine/generator applications”. 18th International Conference on Composite Structures (ICCS18), Portugal, 2015. 06
  14. Kun Jeong, Seong Su Kim, “Fabrication of the thermoplastic composite impact sensor usable at cryogenic environment”. 18th International Conference on Composite Structures (ICCS18), Portugal, 2015. 06
  15. Seung A Song, Seong Su Kim, “Novel grafting methods on the carbon fiber using zinc oxide nano-rods”, 18th International Conference on Composite Structures (ICCS18), Portugal, 2015. 06
  16. Ha Eun Lee, Song Hee Han, Seong Su Kim, “Development of carbon fiber reinforced thermoplastic composite bipolar plates for polymer electrolyte membrane fuel cell”, 31th International Conference of the Polymer Processing Society (PPS31), Korea, 2015. 06.
  17. Seung A Song, Seong Su Kim, “Surface characteristics of zinc oxide coated carbon fibers”, 31th International Conference of the Polymer Processing Society (PPS31), Korea, 2015. 06.
  18. Seung Jin See, Song Hee Han, Seong Su Kim, “Effect of Transistion of Crystal Morphology on Interfacial Properties of Carbon Fiber Reinforced Polypropylene Composite through Al2O3 Surface Treatment”, 9th Asian-Australasian Conference on composite Materials, Suzhou, China, 2014. 10.
  19. Seung A Song, Seong Su Kim, “The mechanical and thermal characteristics of phenolic foams reinforced with carbon nanoparticles”, ECCM16, Spain, 2014.
  20. Hyun Ju Oh, Seong Su Kim, “Dispersion of graphene using the electrostatic repulsion force by electrospray method”, ECCM16, Spain, 2014.
  21. Song Hee Han, Seong Su Kim, “Study on the high-speed RTM to reduce the impregnation time for carbon/epoxy composites”, MECHCOMP2014, USA, 2014.
  22. Seung Yoon On, Seong Su Kim, “Novel dispersion method of graphene for graphene/epoxy composites by electrostatic force”, ISGMA2013, USA, 2013.
  23. Seung A Song, Seong Su Kim, “Mechanical and thermal characteristics of the micro/nano-particles reinforced phenolic foams”, ISGMA2013, USA, 2013.
  24. Song Hee Han, Seong Su Kim, “Evaluation of the impregnation characteristics of the carbon fiber reinforced composites using dissolved polypropylene”, The 19th International Conference on Composite Materials (ICCM19), Canada, 2013.
  25. Hyun Ju Oh, Seong Su Kim, “Effect of Residual solvent and CaCl2 on mechanical properties of electrospun meta aramid nanofiber/epoxy adhesives”, The 19th International Conference on Composite Materials (ICCM19), Canada, 2013.
  26. Seung A Song, Seong Su Kim, “Mechanical and thermal characteristics of the micro/nano-particles reinforced phenolic foams”, The 19th International Conference on Composite Materials (ICCM19), Canada, 2013.
  27. Song Hee Han, Seong Su Kim, “A study of high-speed RTM through thickness direction for reducing impregnation time”, 16th International Conference on Composite Structures (ICCS16), Portugal, 2013.
  28. Hyun Ju Oh, Seong Su Kim, “Failure mode analysis of the meta aramid nanofiber reinforced adhesive joints at cryogenic temperatures”, 16th International Conference on Composite Structures (ICCS16), Portugal, 2013.
  29. Hyun Chul Lee, Seong Su Kim, “Development of the composite strut top plate for automobiles”, 15th International Conference on Composite Structures (ICCS15), Portugal, 2011.
  30. Song Hee Han, Seong Su Kim, “The effect of post-processing of carbon fibers on the mechanical properties of epoxy-based composites”, The 18th International Conference on Composite Materials (ICCM18), Korea, 2011.
  31. Song Hee Han, Seong Su Kim, “The effect of coupling agents on the mechanical properties of carbon fiber reinforced polypropylene composites”, The 20th International Conference on Compoistes/Nano Engineering (ICCE20), China, 2012.
  32. Seong Mi Yu, Seong Su Kim, “Influence of wet spinning parameter and post heat treatment on Crystalline Structure of Poly(vinylidene Fluoride)”, The 20th International Conference on Compoistes/Nano Engineering (ICCE), China, 2012.
  33. Seung A Song, Seong Su Kim, “Novel foaming methods to fabricate the activated carbon reinforced microcellular phenolic foams”, 15th European Conference on Composite Materials (ECCM), Italy, 2012.
  34. Hyun Ju Oh, Seong Su Kim, “The effects of the core-shell structured meta-aramid/epoxy nanofiber mats on the epoxy adhesive joints at cryogenic temperatures,” 15th European Conference on Composite Materials (ECCM), Italy, 2012.
  1. Yun Seong Kim, Seong Su Kim, “Groove Shape Optimization of Composite Slider Bearing Under Low Speed and Heavy Load” the Korean Society of Tribologists and Lubrication Engineers (KSTLE) spring conference, Busan, Korea, 2018. 04.
  2. Seung Yoon On, Yun Seong Kim, Seong Su Kim, “Dynamic characteristics of carbon fiber composite tilting pad journal bearing” the Korean Society of Tribologists and Lubrication Engineers (KSTLE) spring conference, Busan, Korea, 2018. 04.
  3. Su Hyun Lim, Seong Su Kim, “탄소섬유 사이징에 따른 에폭시 수지 유동 특성에 관한 연구” 2018년도 복합재료학회 춘계학술대회, 2018. 04.
  4. Kwang Il Jeong, Seong Su Kim, “금속 산화물 나노 구조체를 이용한 바나듐 레독스 흐름 전지용 전극 연구” 2018년도 복합재료학회 춘계학술대회, 2018. 04.
  5. Seung A Song and Seong Su Kim*, 폴리프로필렌과 탄소섬유 사이의 계면 결합력 향상을 위한 ZnO nanorods 성장,“ 2016년도 추계대한기계학회, 2016. 04.
  6. Seung Yoon On and Seong Su Kim, “The influence of the microwave treated meta-aramid nanofiber mats on the adhesion strength” The Spring Conference of the Korean Society of Mechanical Engineers Jeju, Korea, 2016. 04.
  7. Soo Jin Ham, Seung A Song and Seong Su Kim, “The influence of AlOOH sol and silane coupling agent on the interfacial strength of carbon fiber-reinforced polypropylene composites” The Spring Conference of the Korean Society of Mechanical Engineers Jeju, Korea, 2016. 04.
  8. Ha Eun Lee and Seong Su Kim*, “Sol-gel 방법과 Double percolation effect 적용한 PEMFC 탄소섬유 복합재료 분리판 제조 공정“, 2016년도 춘계기계학회, 2016.04
  9. Go Eun Park, Seung A Song, Seong Su Kim*, “Effect of crystal morphology with respect to solvent evaporation rate on interfacial shear strength of carbon fiber/polyamide66 composites” 2016년도 춘계대한기계학회, 2016. 04
  10. Ha Eun Lee, Song Hee Han, Seong Su Kim, “Development of carbon fiber reinforced thermoplastic composite bipolar plates for polymer electrolyte membrane fuel cell”, The Spring Conference of the Korean Society for Composite Materials, 2015. 05.
  11. Seung A Song, Seong Su Kim, “Study on the improvement of interfacial shear strength by zinc oxide growth on the carbon fiber”. The Spring Conference of the Korean Society for Composite Materials, 2015. 05.
  12. Kang Yeong Choe, Seung Yoon On, Jun Il You, Seong Su Kim*, “Development of the composite journal bearing for turbine/generator applications” 2015년도 춘계대한기계학회, 2015. 04
  13. Da Hye Kim, Seung A Song Kun Jeong, and Seong Su Kim, “Effect of microwave treatment on the piezoelectric property of the electrospun PVDF nanofibers reinforced with MWCNT,” The Fall Conference of the Korean Society for Composite Materials, 2014. 11.
  14. Seung Jin See, Song Hee Han, Seong Su Kim, “Improvement of interfacial strength between carbon fibers and polypropylene by AlOOH-sol treatment”,,” The Fall Conference of the Korean Society for Composite Materials, 2014. 11.
  15. Seung A. Song, Seong Su Kim, “Effect of the coupling agent on the mechanical properties of carbon/PVDF composite,” The Fall Conference of the Korean Society for Composite Materials, 2014. 11.
  16. Seung Jin See, Song Hee Han, Seong Su Kim, “Study on high-speed RTM to reduce the impregnation time for carbon/epoxy composites,” International Carbon Festival, Jeonju, Korea, 2014. 11.
  17. Seung A. Song, Seong Su Kim, “Thermal and electrical characteristics of phenolic based carbon foam,” The Spring Conference of the Korean Society of Mechanical Engineers, 2014. 04.
  18. Hyun Ju Oh, Su Jin Ham, Song Hee Han, Seung Su Kim, “Dispersion of Graphene using the electrostatic repulsion force in the graphene reinforced epoxy composites”. The Spring Conference of the Korean Society of Mechanical Engineers, 2014. 04.
  19. Song Hee han, Hyun Chul Lee, Seong Su Kim, “A study on the high speed multi injection RTM systems for composites” The Fall Conference of the Korean Society of Mechanical Engineers, 2013. 12.
  20. Seung A. Song, Seong Su Kim, “Study on the mechanical properties of the carbon nanoparticle reinforced phenolic foams fabricated by microwave,” The Fall Conference of the Korean Society of Mechanical Engineers, 2013. 12.
  21. Song Hee Han, Hyun Ju Oh, Seong Su Kim, “Evaluation of the impregnation characteristics of carbon fiber-reinforced polypropylene composite using dissolved polypropylene”, The Fall Conference of the Korean Society for Composite Materials, 2013. 11.
  22. Seung Yoon On, Hyun Ju Oh, Seung Mi Yu, Sang-Kyun Hwang, Yong Sik Chung, Hui Yun Hwang, Seong Su Kim, “Fabrication and evaluation for piezoelectric PVDF/PDMS composites by using wet squn PVDF fiber”, The Spring Conference of the Korean Society for Composite Materials, 2013. 05.
  23. Hyun Chul Lee, Hyun Ju Oh, Seong Su Kim, “The Design of a Hybrid Composite Strut Tower for Improving Impact Resistance and Light-weight”, The Fall Conference of the Korean Society for Composite Materials, 2012. 11.
  24. Seung Mi Yu, Hyun Ju Oh, Sang-Kyun Hwang, Yong Sik Chung, Hui Yun Hwang, Seong Su Kim, “Effect of post-treatments for wet spun PVDF on the piezoelectric property”, The Fall Conference of the Korean Society for Composite Materials, 2012. 11.
  25. Song Hee Han, Hyun Ju Oh, Seong Su Kim*, “Evaluation of the mechanical properties of the material of Carbon fiber / polypropylene composite according to carbon fiber surface treatment”, The Fall Conference of the Korean Society of Mechanical Engineers, 2012. 11.
  26. Seung A. Song, Hyun Chul Lee, Seong Su Kim, “Manufacture and characteristic of phenolic foam reinforced activated carbon by using microwave”, The Fall Conference of the Korean Society of Mechanical Engineers, 2012. 11.
  27. Hyun Ju Oh, Hak Yong Kim, Seong Su Kim, “The effect of the core-shell structured meta-aramid/epoxy nanofiber mats on interfacial bonding strength with an epoxy adhesive in cryogenic environments.”, The Fall Conference of the Korean Society of Mechanical Engineers, 2012. 11.
  28. Hyun Ju Oh, Seong Su Kim, “A novel preparative method for enhancing surface adhesion on meta-aramid nanofibers/epoxy adhesive composites by electrospinning”, The Spring Conference of the Korean Society for Composite Materials, 2012.05
  29. Seong Su Kim, “Development of advanced cure cycle to reduce thermal residual stress”, The Spring Conference of the Korean Fiber Society, 2011.04