Alumni

Mechanical Design Lab. With Advanced Materials

Department of Mechanical Engineering

Tel. +82-42-869-3261

Fax. +82-42-869-5221

E-mail fine@kaist.ac.kr

Homepage http://fine.kaist.ac.kr

Address ME 3261, KAIST, Guseong-dong, Yuseong-gu, Daejeon-shi, Republic of Korea

Education

Ph.D. CandidateMechanical EngineeringKAISTPresent
M.S.Mechanical EngineeringKAISTFebruary 1998
B.S.

Mechanical Design and Production Engineering

Yonsei UniversityFebruary 1996

Research Interest

Mechanical System Design

Design of Adhesive Joints

Damage Estimation of Joint Structures

Environmental Effects of Composites and Adhesive Joints

Cure and Strength Monitoring of Composites and Adhesive Joints by Dielectrometry

Design of the Composite Mold by Dielectrometry

Design of the Dielectric Sensor and Measuring Equipment

Repairing Method of Buried Pipes by Composites

Process Control and Machine Design of Reaction Injection Molding

Reliable Joining with Composite Materials

Experience

Nov. 8. 1973. Born in Seoul

Feb. 1986. Graduated Jam-Won Elementary School in Seoul

Feb. 1989. Graduated Shin-Ban-Po Middle School in Seoul

Feb. 1992. Graduated Ban-Po High School in Seoul

2001.~ A Member of Korean Society of Precision Engineering

2001.~ A Member of Korean Society of Composite Materials

Publication

  1. Hygrothermal Effects on the Adhesively Bonded Joint Strength (Master Degree Thesis at KAIST)
    ​

  1. Dai Gil Lee, Jae Wook Kwon and Durk Hyun Cho, “Hygrothermal Effects on the Strength of Adhesively Bonded Joints,” Journal of Adhesion Science and Technology, Vol. 12, No. 11, pp. 1253 – 1275, 1998.
  2. Jae Wook Kwon and Dai Gil Lee, “The Effects of Surface Roughness and Bond Thickness on the Fatigue Life of Adhesively Bonded Tubular Single Lap Joints,” Journal of Adhesion Science and Technology, Vol. 14, No. 8, pp. 1085-1102, 2000.
  3. Kyung Guen Bang, Jae Wook Kwon, Dai Gil Lee and Jae Won Lee, “Measurement of the degree of cure of glass fiber-epoxy composites using dielectrometry,” Journal of Materials Processing Technology, Vol. 113, pp. 209-214, 2001.
  4. Jae Wook Kwon and Dai Gil Lee, “Environmental Effects on Adhesively Bonded Joints,” Journal of Adhesion Science and Technology, (Accepted).
  5. Dai Gil Lee, Woo Seok Chin, Jae Wook Kwon and Ae Kwon Yoo, “Repair of Underground Buried Pipes with Glass Fiber Composites Using RTM,” Composite Structures, (Preparing).
  6. Jae Wook Kwon and Dai Gil Lee, “Cure Monitoring of Adhesively Bonded Joints by Dielectrometry,” Journal of Adhesion Science and Technology, (Preparing).
  7. Jae Wook Kwon and Dai Gil Lee, “In-situ Strength Monitoring of Adhesively Bonded Joints by the Impedance Method,” Journal of Adhesion Science and Technology, (Preparing).
  8. 권재욱, 조덕현, 이대길, 이재원, 이윤목, ” 고온, 고습에 노출된 접착제 및 접착 조인트의 기계적 특성,” 한국복합재료학회지, 제 11권, 제 2호, pp. 29-39, 1998.
  9. 권재욱, 이대길, “비틀림 접착 조인트의 피로 수명에 대한 표면 조도와 접착 두께의 영향,” 대한기계학회논문집 A권, 제 24 권, 제 8 호, pp. 2022-2031, 2000.
    ​

  1. Jae Wook Kwon and Dai Gil Lee, “Environmental Effects on Adhesively Bonded Joints,” MST Conference 2nd International Symposium of Adhesive Joints Formation Characteristics and Testing, New York, USA, 2000.
  2. Jae Wook Kwon and Dai Gil Lee, “Cure Monitoring of Thermosetting Composites by LAOCMTECH Dielectrometry,” International Conference on Composite Materials 13th, Beijing, China, 2001.
  3. 권재욱, 조덕현, 이대길, ” 흡습열에 노출된 접착 조인트의 강도에 관한 연구,” 한국복합재료학회 춘계학술대회, pp. 11-16, 1997.
  4. 권재욱, 이대길, “자동차 차체에 적용된 접착 조인트의 환경 영향,” 한국자동차공학회 춘계학술대회, pp. 488-493, 1998.
  5. 권재욱, 이대길, “쾌속제작을 위한 RIM 경화 모니터링에 관한 연구,” 쾌속시작기술연구회 추계학술대회, pp. 6-11, 1999.
  6. 권재욱, 김진국, 김학성, 이대길, 최진경, “유전기법을 이용한 복합재료 경화 모니터링,” 한국복합재료학회 추계학술대회, pp. 42-45, 2000.
  7. 진우석, 권재욱, 이대길, “RTM을 이용한 노후 지하 매설관의 보수-보강에 관한 연구,” 한국복합재료학회 추계학술대회, pp. 249-252, 2000.
  8. 김학성, 권재욱, 김진국, 이대길, “복합재료 경화도 측정을 위한 유전 센서,” 한국복합재료학회 춘계학술대회, pp. 219-223, 2001.
  9. 권재욱, 이대길, “RIM 시작공정을 위한 경화 모니터링,” 한국정밀공학회 춘계학술대회, pp. 42-45, 2001.
  10. 진우석, 권재욱, 이대길, 유애권, “신소재 복합재료를 이용한 비굴착 지하 매설관 보수-보강 공법,” 한국복합재료학회 추계학술대회, pp. 43-48, 2001.
    ​

  1. 복합재료를 이용한 자동차용 가드레일 (대한민국, 등록 No. 0236915)
  2. 자동차용 동력전달축 (대한민국, 등록 No. 0241851)
  3. 원심 주조용 복합재료 금형 (대한민국, 등록 No. 0255113)
  4. 복합재료 비계 (대한민국, 등록 No. 0257848)
  5. 복합재료 볼 스크루 (대한민국, 등록 No. 0275365)
  6. 자체 냉각구조를 갖는 복합재료 중공축 (대한민국,등록 No. 0276794)
  7. 수지이송성형법을 이용한 하수관의 보수 및 보강방법 (대한민국, 출원 No. 10-2000-0015776)
  8. 이동식 압출성형식을 이용한 하수관의 보수 및 보강방법 (대한민국, 출원 No. 10-2000-0015777)
  9. 보호막을 갖춘 수지이송성형법을 이용한 하수관의 보수-보강 공법 (대한민국, 출원 No. 10-2000-0042253)
  10. 자동차 도어의 임팩트 빔 (대한민국, 출원 No. 10-2000-0066249)
  11. 온도와 유전율을 동시에 측정하기 위한 온도 유전센서 및 그 제조방법 (대한민국,출원 No. 10-2001-0010744)
  12. 플라즈마 디스플레이 패널의 격벽 제조용 금형 (대한민국,출원중)
  13. 신소재를 이용한 비굴착 지하매설관 보수, 보강 공법 (대한민국,출원중)
  14. Hybrid Driveshaft of an Automobile and Method for Producing it (USA, Serial No. 09/104, 109)
  15. Impact beam for car doors (USA, Japan 2001-161810, UK 11599.7, German 101 27 188.3, Italy RM2001A000247)
  16. Method of Repairing or Reinforcing Worn-Out Underground Drainpipes through Resin Transfer Molding Process Using Both Flexible Tubes and Bagging Films (USA)
  17. Reinforcing Element of Underground Pipe, and Trenchless Repairing and Reinforcing Method Using the Same, International Patent, PCT/KR01/01995, 2001

Honors

Aug. 1990    Bronze Medal at 3rd Korean Mathematical Olympiad

Interests and Extracurricular Activities

Interests

  • Oil Painting
  • Baduk (Go)
  • Skate
  • Baseball

Licenses

  • Drivers license