Alumni

Mechanical Design Lab. With Advanced Materials

Department of Mechanical Engineering

Tel. +82-42-350-7138

Fax. +82-42-350-7130

E-mail zagato@kaist.ac.kr

Experience

2009.9-present    Research assistant professor of KIDCS (KAIST Institute for Design of Complex System)

2008.8-2009.8     Brain Korea 21 (BK21) post-doctor

Education

Ph.D.Mechanical EngineeringKAISTFebruary 2008
M.S.Mechanical EngineeringKAISTFebruary 2005
B.S. Mechanical EngineeringKorea UniversityFebruary 2003

Research Interest

Design of the adhesive joint suitable to the impact loading

Static and fatigue characteristics of the Hybrid joint

Thermoplastic coating of fiber-reinforced composite materials

Draping and compression molding of fiber-reinforced composite materials

Publication

  1. Effects of thermo-mechanical property and surface treatment on the anti-corrosion property of the marine epoxy paint (Master Thesis at KAIST)
  2. Development of composite spherical bearing (Ph. D. Thesis at KAIST)

  1. Hak Sung Kim , Byung Chul Kim, Tae Seong Lim and Dai Gil Lee, “Foreign objects impact damage characteristics of Aluminum/Composite hybrid drive shaft,” Composite Structures, Vol. 66, pp.377-389, 2004.
  2. Tae Seong Lim, Byung Chul Kim and Dai Gil Lee, “Fatigue Characteristics of the Bolted Joints for Unidirectional Composite Laminates,” Composite Structures, Vol. 72, pp. 58-68, 2006.
  3. Dong Chang Park, Seung Min Lee, Byung Chul Kim, Hak Sung Kim and Dai Gil Lee, “Development of Heavy-duty Hybrid Carbon-Phenolic Hemispherical Bearings,” Composite Structures, Vol. 73, pp. 88-98, 2006.
  4. Dong Chang Park, Seong Su Kim, Byung Chul Kim, Seung Min Lee and Dai Gil Lee, “Wear Characteristics of Carbon-Phenolic Woven Composites Mixed with Nano Particles,” Composite Structures, Vol. 74, No. 1, pp. 89-98, 2006.
  5. Seung Min Lee, Dong Chang Park, Byung Chul Kim and Dai Gil Lee, “Strength of functionally gradient composite hemispherical bearings,” Composite Structures, Vol. 74, No. 2, pp. 145-152, 2006.
  6. Dai Gil Lee and Byung Chul Kim, “Investigation of coating failure on the surface of water ballast tank of an oil tanker,” Journal of adhesion science and technology, Vol. 19, No. 10, pp.879-908, 2005.
  7. Byung Chul Kim, Dong Chang Park, Hak Sung Kim and Dai Gil Lee, “Development of composite spherical bearing,” Composite Structures, Vol. 75, pp. 231-240, 2006.
  8. Byung Chul Kim and Dai Gil Lee, “Endurance and performance of a composite spherical bearing,” Composite Structures, Vol. 87, No. 1, pp. 71-79, 2009.
  9. Byung Chul Kim, Sang Wook Park and Dai Gil Lee, “Fracture toughness of the nano-particle reinforced epoxy composite,” Composite structures, Vol. 86, pp. 69-77, 2008.
  10. Byung Chul Kim and Dai Gil Lee, “Development of a spherical bearing with uni-directional carbon/epoxy composite,” Composite Structures, Vol. 89, No. 1, pp. 102-109, 2009.
  11. Sang Wook Park, Byung Chul Kim and Dai Gil Lee, “Tensile lap shear strength of adhesively bonded joints reinforced with nano-particles,” Vol. 23, No. 1, pp. 95-113, Journal of Adhesion Science and Technology, 2009.
  12. Soon Ho Yoon, Byung Chul Kim, Kwan Ho Lee and Dai Gil Lee, “Effects of E-glass fiber on the adhesive fracture toughness of bonded aluminum joints at cryogenic temperature,” Journal of Adhesion Science and Technology, Vol. 24, pp. 429-444, 2010.
  13. Byung Chul Kim, Dong Chang Park, Byoung Jung Kim and Dai Gil Lee, “Through-thickness compressive strength of a carbon/epoxy composite laminate,” Composite Structures, Vol. 92, No. 2, pp. 480-487, 2010.
  14. Byung Chul Kim, Soon Ho Yoon, Kwan Ho Lee and Dai Gil Lee, “Pressure resistance of the corrugated stainless steel membranes of LNG carriers,” Ocean Engineering, 2010. (Submitted).
  15. Joon Woo Lim, Byung Chul Kim, and Dai Gil Lee, “Development of the hybrid insert for composite sandwich satellite structures,” Composite Science and Technology, 2010. (Submitted)
  1. Hak Sung Kim , Byung Chul Kim, Tae Seong Lim and Dai Gil Lee, “Foreign objects impact damage characteristics of Aluminum/Composite hybrid drive shaft,” 12th International Conference on Composite Structures, Melbourne, Australia, 2003.
  2. 황희윤, 김병철, 이대길, “고정부조건이 복합재료 공구용 바의 동적 특성에 미치는 영향,” 한국복합재료학회 추계학술발표대회, 2003.
  3. 박동창, 김성수, 김병철, 이대길, “탄소섬유직물/페놀 복합재료의 압축 특성,” 한국복합재료학회 춘계학술대회, 2004.
  4. 김병철, 임태성, 박동창, 이대길, “일방향 복합재료 하이브리드 조인트의 정적 및 피로특성에 관한 연구,” 한국복합재료학회 춘계학술대회, 2004.
  5. Bong June Zhang, Chae-Seon Lim, Byung Chul Kim and Dai Gil Lee, “Stress analysis and evaluation of cracks developed on the coatings for welded joints of water ballast tanks,” CORROSION/2005, Houston, Texas, 2005.
  6. 김병철, 손민영, 임채선, 이대길, “열응력에 의한 선박용 에폭시 페인트의 도막파손에 관한 연구,” 대한기계학회 춘계학술대회, 2005.
  7. 김병철, 이대길, 박동창, 이강영, 이진규, 정옥희, “ISU용 고하중 복합재료 구면베어링의 설계와 시험평가,” 제 13회 지상무기체계 발전 세미나, 2005.
  8. Byung Chul Kim, Dong Chang Park, Hak Sung Kim and Dai Gil Lee, “Development of composite spherical bearing,” 13th International Conference on Composite Structures, Melbourne, Australia, 2005.
  9. Byung Chul Kim and Dai Gil Lee, “Development of carbon fiber reinforced composite spherical bearing with dry self-lubricating property,” Korea-Japan Young Researchers Workshop on Composite Materials 2007 (KAIST/Nihon Univ./Doshisha Univ./Waseda Univ.), Tokyo, Japan, 2007.
  10. Byung Chul Kim, Sang Wook Park and Dai Gil Lee, “Fracture toughness of the nano-particle reinforced epoxy composite,” 14th International Conference on Composite Structures, Melbourne, Australia, 2007.
  11. Sang Wook Park, Byung Chul Kim and Dai Gil Lee, “Tensile lap shear strength of adhesively bonded joints reinforced with nano-particles,” 14th International Conference on Composite Structures, Melbourne, Australia, 2007.
  12. Kwan Ho Lee, Soon Ho Yoon, Byung Chul Kim and Dai Gil Lee, “Design of a hybrid composite anchor for LNG cargo containment systmes,” 13th US-Japan Conference on Composite Materials, Surugadai Campus, Nihon University, Tokyo, Japan, 2008.
  13. 윤순호, 김병철, 이관호, 이대길, “E-glass/Epoxy 복합재료를 이용한 알루미늄 접착조인트의 극저온 파괴 인성 향상,” 한국복합재료학회 추계 학술대회, 2008.
  14. Soon Ho Yoon, Byung Chul Kim, Kwan Ho Lee and Dai Gil Lee, “Improvement of fracture toughness of adhesively bonded aluminum joints at cryogenic temperature,” Korea-Japan Young Researchers Workshop on Composite Materials, KAIST, Daejeon, Korea, 2008.
  15. Byung Chul Kim, Dong Chang Park, Byoung Jung Kim and Dai Gil Lee, “Through-thickness compressive strength of a carbon/epoxy composite laminate,” 15th International Conference on Composite Structures, Porto, Portugal, 2009.
  1. “골프 샤프트 및 그 제조 방법,” 출원 제 1020030056592 호, 등록 제 100511203 호, 이대길, 임태성, 박동창, 황희윤, 이승민, 김병철, 2005, 대한민국특허
  2. “하이브리드 복합재료 궤도 핀,” 출원 제 1020030063222 호, 등록 제 100567185 호, 이대길, 박동창, 김성수, 김병철, 임태성, 이승민, 2006, 대한민국특허
  3. “안전화용 복합재료 선심구조,” 출원 제 1020030078457 호, 등록 제 100581718 호, 이대길, 임태성, 이승민, 김종운, 김병철, 2006, 대한민국특허
  4. “바이트결합을 위한 복합재료 공구용 바,” 출원 제 1020030065971 호, 등록 제 100548964 호, 이대길, 황희윤, 이승민, 김병철, 2006, 대한민국특허
  5. “동특성 향상을 위한 복합재료 공구용 바,” 출원 제 1020030065972 호, 등록 제 100583583 호, 이대길, 황희윤, 이승민, 김병철, 2006, 대한민국특허
  6. “결합형 스크롤 및 그 제조방법,” 출원 제 1020040004811 호, 등록 제 100567188 호, 이대길, 박동창, 김병철, 2006, 대한민국특허
  7. “충격흡수구조를 가지는 로봇 팔,” 출원 제 1020030068433 호, 등록 제 100567186 호, 이대길, 서정도, 이창섭, 임태성, 진우석, 이학구, 황희윤, 이승민, 김병철, 2006, 대한민국특허
  8. “압전 재료 혹은 전도성 재료를 이용하여 민감도가 향상된 접합 구조물의 접합부 안전성 검사방법,” 출원 제 1020040096491 호, 등록 제 100755908 호, 이대길, 진우석, 황희윤, 이승민, 김병철, 권재욱, 2007, 대한민국특허
  9. “복합재료 폴리곤 미러,” 출원 제 1020040014052 호, 등록 제 100632238 호, 이대길, 방경근, 김병철, 2006, 대한민국특허
  10. “다단형 내면가공에 사용되는 복합재료 바이트 홀더,” 출원 제 1020040021141 호, 등록 제 100578070 호, 이대길, 황희윤, 김병철, 2006, 대한민국특허
  11. “절삭바이트 장착용 하이브리드 바이트 홀더,” 출원 제 1020040035962 호, 등록 제 100589618 호, 이대길, 황희윤, 김병철, 윤영소, 김상곤, 2006, 대한민국특허
  12. “베어링조립체 및 그 제조방법,” 출원 제 1020040069955 호, 등록 제 100619473 호, 이대길, 박동창, 이승민, 김병철, 김학성, 김성수, 김종운, 2006, 대한민국특허
  13. “수윤활식 하이브리드 복합재료 저널베어링 및 그 제조방법,” 출원 제 1020050012699 호, 등록 제 100707977 호, 이대길, 김성수, 박동창, 김병철, 2007, 대한민국특허
  14. “프로브 카드 및 그 제조방법,” 출원 제 1020050031100 호, 등록 제 100711292 호, 이대길, 김성수, 김병철, 박동창, 2007, 대한민국특허
  15. “복합재료와 금속으로 이루어진 경량 붐 어셈블리,” 출원 제 1020050062623 호, 등록 제 100715427 호, 이대길, 김병철, 2007, 대한민국특허
  16. “구면베어링 조립체 제조방법,” 출원 제 1020050071051 호, 등록 제 100660462 호, 이대길, 김병철, 박동창, 2006, 대한민국특허
  17. “구면베어링 조립체의 제조장치 및 제조방법,” 출원 제 1020060108245 호, 등록 제 100803055 호, 이대길, 김병철, 2008, 대한민국특허
  18. “Robot Arm with Impact Absorption Structure,” Application No. 10/954,569, Dai Gil Lee, Jung Do Suh, Chang Sup Lee, Tae Sung Lim, Woo Seok Chin, Hak Gu Lee, Seung Min Lee, Byung Chul Kim, 2004, US Patent Pending.
  19. “衝擊吸收構造を有する口ずシトア一公,” Patent No. 3917153, Dai Gil Lee, Jung Do Suh, Chang Sup Lee, Tae Sung Lim, Woo Seok Chin, Hak Gu Lee, Seung Min Lee, Byung Chul Kim, 2007, Japan Patent.
  20. “Composite Tool Bar”, Application No. PCT/KR2004/002424, Dai Gil Lee, Hui Yun Hwang, Seung Min Lee, Byung Chul Kim, 2004, International Patent Pending.
  21. “Nondestructive Reliability Monitoring Method for Adhesively Bonded Structures Whose Sensitivity Is Improved by Using Piezoelectric or Conductive Materials,” Application No. PCT/KR2004/002424, Dai Gil Lee, Woo Seok Chin, Hui Yun Hwang, Seung Min Lee, Byung Chul Kim, Jae Wook Kwon, 2004, International Patent Pending.
  22. “Bearing assembly and method for manufacturing the same,” Application No. 11/044294, Patent No. 7182518, Dai Gil Lee, Dong Chang Park, Seung Min Lee, Byung Chul Kim, Hak Sung Kim, Sung Su Kim, Jong Woon Kim, 2007, US Patent.
  23. “Bearing assembly and method for manufacturing the same,” Application No. 11/679038, Dai Gil Lee, Dong Chang Park, Seung Min Lee, Byung Chul Kim, Hak Sung Kim, Sung Su Kim, Jong Woon Kim, 2007, US Patent Pending.
  24. “Probe card and method for producting the same,” Application No. 11/287455, Patent No. 7248064, Dai Gil Lee, Seong Su Kim, Byung Chul Kim, Dong Chang Park, 2007, US Patent.
  25. “Probe card and method for producting the same,” Application No. 11/766656, Patent No. 7319317, Dai Gil Lee, Seong Su Kim, Byung Chul Kim, Dong Chang Park, 2007, US Patent.
  26. “プローブカードおよびその製造方法,” Application No. 2005-341656, Dai Gil Lee, Seong Su Kim, Byung Chul Kim, Dong Chang Park, 2005, Japanl Patent Pending.
  27. “Method for manufacturing spherical bearing assembly,” Application No. PCT/KR2006/000487, Dai Gil Lee, Byung Chul Kim, Dong Chang Park, 2006, International Patent Pending.
  28. “Nondestructive reliability monitoring method for adhesively bonded structures whose sensitivity is improved by using piezoelectric or conductive materials,” Application No. US11/752,159, Dai Gil Lee, Woo Seok Chin, Hui Yun Hwang, Seung Min Lee, Byung Chul Kim, Jae Wook Kwon, 2007, US Patent Pending.
  29. “Procede non destructif de controle de fiabilite pour structures assemblees par collage dont la sensibilite est amelioree par l’utilisation de materiaux piezoelectriques ou conducteurs,” Application No. EP05726870.8, Dai Gil Lee, Woo Seok Chin, Hui Yun Hwang, Seung Min Lee, Byung Chul Kim, Jae Wook Kwon, 2007, European Patent Pending.
  30. “圧電材料または伝導性材料を用いて敏感度が向上した接合構造物の接合部安全性検査方法,” Application No. JP2007-542875, Dai Gil Lee, Woo Seok Chin, Hui Yun Hwang, Seung Min Lee, Byung Chul Kim, Jae Wook Kwon, 2007, Japan Patent Pending.
  31. “Apparatus and method for manufacturing spherical bearing assembly,” Application No. US11/976373, Dai Gil Lee, Byung Chul Kim, 2007, US Patent Pending.
  32. “Appareil et procede de fabrication d’un assemblage de palier spherique,” Application No. FR07/07708, Dai Gil Lee, Byung Chul Kim, 2007, European Patent Pending.
  33. “球面ベアリング組立体の製造装置及びその製造方法,” Application No. JP2007-272935, Dai Gil Lee, Byung Chul Kim, 2007, Japan Patent Pending

…. many others

  1. 박상욱, 김학성, 김성수, 이대길, “Design Tool for adhesively bonded Joint”, 대한민국 프로그램등록, 2004-01-12-2393 호, 2004

Awards

  1. Prize of the Chief Presidential Secretary in design contest “Taegukgi (the Korean national flag) with us,” celebrating the 50th anniversary of the foundation of the Korean government, hosted by the Presidential Secretariat, 1998. 9. 1
  2. Encouragement award in design contest “Decalcomania of a race car for the A1 team Korea,” celebrating competition in 2008/09 A1 Grand Prix hosted by Omnibus Partener, Co., Ltd., and by Korean leisure and sports association, supervised by GoodEMG, Co., Ltd., and sponsored by the Ministry of culture, sports and tourism and the Korea sports promotion foundation, 2008. 8. 13.
  3. 2008 Outstanding Dissertation Award for BK21, KAIST, 2008. 8. 21.
  4. Encouragement award in Invention idea contest sponsored by Intellectual Ventures, Inc., KAIST, 2008. 12. 30.
  5. ICEM (International conference on experimental mechanics) research award “Distinguished Academic Achievement Award in the field of experimental mechanics,” KAIST, 2009. 5. 12.

Technology transfer

  1. Transferred 2 inernational (US7182518, US2007/0140607) and 2 domestic (KR586228, KR619473) patents related to the composite hemispherical bearing to DACC Ltd., a leading Korean manufacturer of carbon-carbon composites, 2009. 2. 2.
  2. Transferred technologies and 3 domestic patents (KR10-2008-0083880, KR10-2008-0083878, KR10-2009-0077570) related to the pH sensitive coating materials to NABAKEM Co. Ltd., a leading Korean manufacturer of aerosol products, 2009. 10.

Software literacy

Engineering softwares

  • CATIA V5
  • Autocad
  • ABAQUS
  • PATRAN
  • Hypermesh
  • Hyperform

Design Softwares

  • Rhino 3D
  • Alias autostudio

Etc.

  • Flash
  • 3D studio MAX

Interests and Extracurricular Activities

Interests

  • Car Design
  • Guitar
  • Computer graphics